Kyocera ECOSYS FS-3920DN FS-2020D/3920DN/4020DN Operation Guide (Basic) - Page 64
Remove the label from the toner container.
View all Kyocera ECOSYS FS-3920DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
2 Push lock lever to the right and pull out the toner container. 3 Put the old toner container in the plastic bag (contained in the toner kit) and discard it later according to the local code or regulations for waste disposal. 4 Take the new toner container out of the toner kit. 5 Shake the new toner container at least 10 times as shown in the figure in order to distribute the toner evenly inside the container. 6 Remove the label from the toner container. 7 Set the new toner container in the printer and push down on the top of the toner container to install it firmly in place as shown at the left. 8 Close the top cover. Proceed to the next section. 4-4 Maintenance
4-4
Maintenance
2
Push lock lever to the right and pull out the toner container.
3
Put the old toner container in the plastic bag (contained in the toner
kit) and discard it later according to the local code or regulations for
waste disposal.
4
Take the new toner container out of the toner kit.
5
Shake the new toner container at least 10 times as shown in the
figure in order to distribute the toner evenly inside the container.
6
Remove the label from the toner container.
7
Set the new toner container in the printer and push down on the top
of the toner container to install it firmly in place as shown at the left.
8
Close the top cover.
Proceed to the next section.