Kyocera ECOSYS FS-C2126MFP FS-C2026MFP+/C2126MFP+ Operation Guide - Page 436
periodically faint or
View all Kyocera ECOSYS FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 436 highlights
Symptom Checkpoints Irregular horizontal - lines appear in the image. The altitude is 1500 m - or higher and irregular horizontal white lines appear in the image. Troubleshooting Corrective Actions Run [MC] and decrease the adjustment value. Decrease the adjustment value 1 level at a time from the current value. If there is no improvement after the value is decreased by 1 level, decrease by 1 level again. If there is still no improvement, return the setting to the original value. Run [Altitude Adj.] and set the adjustment value to [High 1]. If there is no improvement when the value is set to [High 1], set to [High 2]. Reference Page 8-115 8-114 The altitude is 1500 m - or higher and dots appear in the image. Part of the image is - periodically faint or shows white lines. - Run [Altitude Adj.] and set the adjustment value to [High 1]. If there is no improvement when the value is set to [High 1], set to [High 2]. 8-114 Open and then close the rear cover. Run [Drum Refresh]. - 8-113 The background density is obtrusive. Colors appear different than you anticipated. - Carry out Background Density. Did you choose appropriate image quality for the original? Have you loaded color copy paper into the paper tray? - Select appropriate image quality. Load color copy paper into the paper tray. Run [Color Calibration]. 4-23 3-11 5-15 2-26 8-104 10-6