Kyocera ECOSYS FS-C8650DN Kyocera Command Center RX User Guide Rev-1.60 - Page 31
Error Clear Timer, Auto Error Clear
View all Kyocera ECOSYS FS-C8650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Settings Pages If you have selected Energy Saver mode of sleeping, click On of the appropriate radio button for the interface or device you would like to engage in Energy Saver. Click Off if you do not want to engage Energy Saver for the interface or device. For example, if you want print data received by the network interface to automatically wake the machine and be printed, click Off next to Network. 4 Click Submit. Power Off Timer This feature is incorporated with some models. It automatically turns off the machine in the absence of data for a predetermined time interval. This will conserve more energy that the machine uses. You can manage the interval and conditions that the power off timer is activated as follows: 1 From the drop-down list, select the time interval after which the device engages in power-off state, from 1 hour to 1 week. 2 Click Advanced to open Power Off Rule. 3 Select the interface or device which you want to activate (On) or deactivate (Off) the power-off timer. Override A4/Letter Specifies whether or not the A4 and Letter size paper should be interchangeable. When turned On, for example, if the A4 paper is not in the tray, the Letter size paper will be selected for printing. When turned Off, the Letter size paper will not be used in place of the A4 paper, when A4 is selected for printing but the A4 tray is empty. Auto Error Clear Turns Auto Error Clear, which automatically clear errors when they occur, on or off. Error Clear Timer Specifies the time between 5 and 495 seconds after which errors are cleared automatically. Low Power Timer Specifies the time from 1 to 240 minutes after which the system enters the low power mode, where it reduces the power consumption. Interrupt Clear Time This determines the time period before the machine reverts to normal mode, after the interrupt copy mode has been engaged. The range is 5 to 459 seconds (in 5-second increments). WSD Scan Timer This determines the time period before the machine reverts to normal mode, after WSD scan mode has been engaged. The range is 10 to 495 seconds (in 5-second increments). RAM Disk Mode Specifies whether to use a part of the print system memory as a RAM disk. You can specify the size of the print system memory to use for the RAM disk. If this item is On, electronic sorting is enabled and the printing speed increases. After you have changed the setting, you must restart the printing system. COMMAND CENTER RX 6-7