Kyocera ECOSYS M6526cidn Kyocera Command Center RX User Guide Rev-2013.02 - Page 63
Protocol, Encryption Key for Outbound
View all Kyocera ECOSYS M6526cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Network Settings PFS: When PFS is turned On (enabled), even if a key is decrypted, the decrypted key cannot be used to decrypt the other keys generated after the decryption. This improves the safety, but imposes a heavy burden because of more key-generation processes. Diffie-Hekkman Group: When PFS is turned On (enabled), select the Diffie-Hekkman Group to use. Lifetime Measurement: Select Time or Time & Data Size. Lifetime (Time): Configure the lifetime of IPSec SA in seconds. Lifetime (Data Size): Configure this item when is Time & Data Size selected as Lifetime Measurement. Configure the lifetime (data size) of IPSec SA in kilobytes. Extended Sequence Number: Determines whether a sequence number is 64-bit extended by IPSec. To execute, select On. 6. Manual: If Key Management Type is set to Manual, configure: Protocol, Hash, Encryption, SPI Format, SPI for Inbound, SPI for Outbound, Key Format, Authentication Key for Inbound, Authentication Key for Outbound, Encryption Key for Inbound, Encryption Key for Outbound. Click Submit button to finalize settings. 3. Click Submit button. Protocol This section includes advanced settings for various protocols used as the communication procedures and communication protocols. *: If the settings for the item marked with an asterisk (*) has been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. 1. Click Protocol under Network Settings on the navigation menu. The Protocol Settings page opens. 2. This section includes the following items for configuration. Print Protocols Configure the protocols used for printing. This section includes the following items for configuration: 1. NetBEUI: The NetBEUI protocol allows Peer-to-peer printing (SMB Print). With this protocol enabled, the printing system is created in Windows Network Neighborhood. NetBEUI is an enhanced version of the NetBIOS protocol, which is used for transport of SMB protocol. Enables or disables the NetBEUI protocol. If NetBEUI is turned On, the name resolution by NetBIOS (NMB) becomes available. Workgroup: Workgroup represents the workgroup which will appear in Entire Network in "Windows Network Neighborhood." Comment: You can enter comments here. (This can be left blank.) 2. LPD: The LPD protocol is a printing system designed for printing text or PostScript files. To enables the LDAP protocol, turn this item On. 3. FTP Server (Reception): FTP is a communications protocol for transmitting files over a Network. To enables the FTP protocol, turn this item On. 4. IPP: IPP is a protocol which performs transmission and reception of printing data and configuration of printing systems through TCP/IP networks including the Internet. To enables the IPP protocol, turn this item On. Enter Port Number between 1 to 32767. Typically, this should be 631. 5. IPP over SSL: A certificate can be added for communication using the IPP protocol. To enable the IPP protocol, turn this item On. To enable this protocol, select On on SSL of the Network Security Settings page. Enter Port Number User Guide 59