Kyocera ECOSYS P6030cdn Kyocera NET ADMIN Operation Guide for Ver 3.1 - Page 12
Connecting a USB device, Local Device Agent Installation, Installing a Local Device Agent - driver
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation The computer must have at least one connected local Kyocera USB device. The computer must have a real network interface card. The computer must be connected to the network. The computer must have an IP address in the connected network. TCP port numbers 9000 and 9072 on the computer must be free and not blocked by a firewall. The user installing the LDA must have administrator rights to install a Microsoft Windows service. Connecting a USB device You can connect a local device via USB to a network computer. The device can then be discovered and managed by the application. 1 Ensure that KYOCERA Net Admin is installed and operating. 2 Select another computer located on the same network as the server. 3 Connect the device to the computer with a USB cable. 4 On the computer, install the KX driver of the USB model printing device. 5 Continue by installing the LDA service on the computer. Local Device Agent Installation The Local Device Agent (LDA) is a Microsoft Windows service that lets the agent discover and manage local devices that are connected to network computers through USB ports. The LDA service is installed and started on a computer with a local USB device. LDA uses the computer's IP address to communicate with the agent. The KYOCERA Net Admin server has a Connection type column to distinguish whether the device is network- or locallyconnected. The types of device properties that can be requested through the LDA vary according to the device model. Local USB devices do not support the full list of properties that are supported by the same model on a network. The LDA does not support setting of properties for a local connected device. Note: The device home page cannot be opened from KYOCERA Net Admin for USB-connected devices. The LDA service cannot be used at the same time with some other utilities, such as the Status Monitor. If the LDA service does not start, try disabling the Status Monitor and restarting the LDA service. Installing a Local Device Agent You can install a Local Device Agent (LDA) to discover and manage local devices that are connected to network computers through USB ports. The USB device must be connected to the target computer before installing the LDA. 1 Copy the folder C:\Program Files\Kyocera\NetAdmin\Admin\install\local-deviceagent (C drive is the default) to the target computer. 1-9 Installation Guide