Kyocera FS 1100 Service Manual - Page 28
MP tray/Cassette1/Cassette 2/Cassette 3/Duplex, bit 5 = 0: For Europe, 1: For US - flash
View all Kyocera FS 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2H5/2HS Service items Description No. Items Description ᕃ Engine ROM information [Flash ROM version] ᕄ Boot ROM information [Boot ROM version] ᕅ Software jumper switch information (hexadecimal) [First byte/Second byte (displayed in OEM model only)] First byte bit 0 = 1: (Fixed) bit 1 = 0: Overseas, 1: Domestic (Japan) bit 2, 3 (Not used) bit 4 = 0: Kyocera, 1: OEM bit 5 = 0: For Europe, 1: For US bit 6 = 0: Non MICR mode, 1: MICR mode bit 7 (Not used) Second byte: Displayed in OEM model only ᕆ Total page - ᕇ Toner install information - ᕈ USB information 00: Not connected 01: Full-Speed 02: Hi-Speed ᕉ Operation panel lock status (displayed only when locked) 01: Partial lock 02: Full lock ᕊ NVRAM error (displayed 01: ID error 03: Checksum error only when any error has 02: Version error 04: NVRAM crush error occurred) Code conversion ᕋ Printable area setting /Top offset/Left offset/Page length/Page width ᕍᕠ Left offset for eacAh papeBr /CMP traDy/CassEette1/FCasseGtte 2/CHassettIe 3/DuJplex source 0 1 (12/600 in3ches u4nit) 5 6 7 8 9 ᕍᕗ Top offset for each paper source /MP tray/Cassette 2/Cassette 3/Duplex (1/600 inches unit) ᕍᕘ Offset for rotation /Top offset/Left offset/ (1/600 inches unit) ᕍᕙ Optional paper feeder ver- /Paper feeder 1/Paper feeder 2/ sion ᕍᕚ Calibration table setting Setting value (FRPO I4), Hexadecimal ᕍᕛ Resolution Current value of bit-per-pixel ᕍᕜ Copy quantity - ᕍᕝ Installed device/function information bit0: HDD bit1: Optional ROM bit2: Memory card bit3: USB memory bit4: HDD security ᕍᕞ Operation panel message PMSG command setting (decimal) language ᕍᕟ Current temperature 0 to 50 °C/32 to 122 °F (in 1 °C/1.8 °F increment, "-" = Temperature sensor is abnormal.) 1-3-4