Kyocera FS-1120D FS-1120D/1320D Operation Guide Rev-1 - Page 94
Installing the Memory Module, Remove the memory module from its package.
View all Kyocera FS-1120D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Installing the Memory Module 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the right cover as shown in the figure. 3 Remove the fixing tape in case of the first installation. Then, remove the memory slot cover as shown in the figure. 4 Push out the clamps on both ends of the memory socket. 5 Remove the memory module from its package. 6 Aligning the cutouts of the memory module with the matching keys of the socket, carefully plug the memory module into the memory socket until it clicks in place. 6-4 Option
6-4
Option
Installing the Memory Module
1
Turn off the printer and disconnect the power cord and printer cable.
2
Remove the right cover as shown in the figure.
3
Remove the fixing tape in case of the first installation. Then, remove
the memory slot cover as shown in the figure.
4
Push out the clamps on both ends of the memory socket.
5
Remove the memory module from its package.
6
Aligning the cutouts of the memory module with the matching keys of
the socket, carefully plug the memory module into the memory
socket until it clicks in place.