Kyocera FS 920 KX Driver Operation Guide Rev. 1.3.1 - Page 37
RAM Disk Settings, To change RAM Disk setting, Device Options, RAM Disk
View all Kyocera FS 920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Printer Properties NOTE The following functions can be used if a hard disk is installed: • Quick Copy • Proof and Hold • Private Print • Job Storage • Temporary Storage • Permanent Storage RAM Disk Settings The RAM Disk functions as a hard disk saving print requests into the printer's memory if a hard disk for printing is not installed. When a hard disk is installed, the RAM Disk function is inactive. NOTE • Since the RAM Disk is volatile memory, all data sent to the printer is lost if the power is turned off. • The size of the RAM Disk is specified in settings on the printer operator panel. For further details, consult the printer's Operation Guide. To change RAM Disk setting: 1 In the Device Options list, enable the RAM Disk check box. The memory capacity can be adjusted in the RAM Disk box. NOTE 2 Specify the RAM Disk size. The maximum RAM Disk capacity may vary depending on your printer model and installed memory. In the example of the FS-9500 shown above, if the memory corresponds to 32MB minus 8 MB, the maximum available capacity for the RAM Disk is 8 MB. The value in the RAM Disk box will not exceed 8 MB. For further details, consult the printer's Operation Guide. 33