Kyocera FS-C8650DN FS-C8650DN Driver Guide - Page 14
Installing in Custom Mode with a Network Connection using Custom Select, Enable Status Monitor
View all Kyocera FS-C8650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation The Status Monitor displays system status messages on your computer screen during printing tasks. The Status Monitor button appears on the Advanced tab. Notify when printing is complete With Enable Status Monitor selected, you can select this additional option to have Status Monitor display a message on your computer when a print job finishes printing. The default is the notification is not displayed (check box cleared). This option is also available in Advanced > Status Monitor. Note: With a USB connection and Status Monitor on, the message appears when printing finishes whether the Notify when printing is complete check box is selected or cleared. When the installation completes successfully, click Finish to exit the installation wizard. A message may appear if there is a software installation failure. Click Finish, and retry the installation. If the same message appears again, contact your system administrator. The installation of the printer is now complete. If prompted, restart your computer. Installing in Custom Mode with a Network Connection using Custom Select This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection. 1 Ensure that your printer and computer are connected to a network. 2 On the Installation Method page, select Custom Mode. 3 The Discover Printing System page opens, searching for your printing system. The Discover button is automatically selected. Choose Custom select and click Next. 4 The Printing System page appears. Select your printing system model from the list and click Next. If there is only one driver model, this page does not appear. Proceed to the next step. 5 On the Printer Port page, select the port connected to your printing system, or add a port connected to your system by clicking Add Port. Click Next. 6 On the Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next. If you only select software packages from the Utility tab, you will skip to the Confirm Settings page. 7 On the Printer Settings page, you can assign a name for your printing system. You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next. 1-7 User Guide