Kyocera KM-1820 KM-NET for Clients Operation Guide Rev-3.7 - Page 14
Add Printing System Wizard, 4.1. Adding the Printing Systems Using Standard Mode
View all Kyocera KM-1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Add Printing System Wizard 4. Add Printing System Wizard To search for printing systems to be registered, click Add System Wizard starts. . The Add Printing 4.1. Adding the Printing Systems Using Standard Mode To add the printing systems using standard mode, perform the following procedure. 1 Select Standard. 2 Select the check box for Network or Local connection according to the desired printing system. 3 Click Next. 4 Perform the instructions displayed by the wizard. The instructions are different depending on the connection type selected above. 10 KM-NET for Clients
Add Printing System Wizard
10
KM-NET for Clients
4.
Add Printing System Wizard
To search for printing systems to be registered, click
Add
. The
Add Printing
System Wizard
starts.
4.1.
Adding the Printing Systems Using Standard Mode
To add the printing systems using standard mode, perform the following procedure.
1
Select
Standard
.
2
Select the check box for
Network
or
Local connection
according to the desired
printing system.
3
Click
Next
.
4
Perform the instructions displayed by the wizard. The instructions are different
depending on the connection type selected above.