Kyocera KM-3530 KX Driver Operation Guide Rev. 1.3.1 - Page 37
RAM Disk Settings, To change RAM Disk setting, Device Options, RAM Disk
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Printer Properties NOTE The following functions can be used if a hard disk is installed: • Quick Copy • Proof and Hold • Private Print • Job Storage • Temporary Storage • Permanent Storage RAM Disk Settings The RAM Disk functions as a hard disk saving print requests into the printer's memory if a hard disk for printing is not installed. When a hard disk is installed, the RAM Disk function is inactive. NOTE • Since the RAM Disk is volatile memory, all data sent to the printer is lost if the power is turned off. • The size of the RAM Disk is specified in settings on the printer operator panel. For further details, consult the printer's Operation Guide. To change RAM Disk setting: 1 In the Device Options list, enable the RAM Disk check box. The memory capacity can be adjusted in the RAM Disk box. NOTE 2 Specify the RAM Disk size. The maximum RAM Disk capacity may vary depending on your printer model and installed memory. In the example of the FS-9500 shown above, if the memory corresponds to 32MB minus 8 MB, the maximum available capacity for the RAM Disk is 8 MB. The value in the RAM Disk box will not exceed 8 MB. For further details, consult the printer's Operation Guide. 33