Kyocera KM-8030 6030/8030 Operation Guide (Advanced Edition) Rev-3
Kyocera KM-8030 Manual
View all Kyocera KM-8030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-8030 manual content summary:
- Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 1
- Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 2
60 cpm (copies per minute) model and 8030 to the 80 cpm model. NOTE: This Advanced Operation Guide contains information that corresponds to using both the inch and metric versions of these copiers. The inch versions of these copiers are shown in the screens in this guide. If you are using the metric - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 3
copying. 3 System Settings Covers general default settings. 4 Job Accounting Provides instructions on managing copier use among departments. Appendix Lists the copier specifications (mechanical and performance specifications and supported paper) and intercompatible functions. Includes a glossary. i - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 4
guides are included with this copier. Refer to the proper guide for your needs. Operation Guide Describes how to load paper, basic copier operations, and troubleshooting. Advanced Operation Guide (This Guide) Covers copying details in depth as well as default settings. Conventions in This Guide - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 5
...ii Conventions in This Guide ...ii 1 Copying Functions Pages 1-35 Memo Mode ...1-38 Batch Scanning ...1-40 Proof Mode ...1-41 Repeat Copy Register Keys ...1-60 Programming Multi-Part Jobs 1-62 2 Document and Copy Count ...3-53 Refreshing the Drum ...3-54 Entering Characters on Touch Panel 3-55 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 6
per Department 4-14 Activating and Deactivating Job Accounting 4-18 Job Accounting Default Settings 4-19 Copying with Job Accounting ON 4-28 Appendix ...Appendix-1 Paper ...Appendix-2 Specifications ...Appendix-9 Intercompatible Functions Appendix-12 Glossary ...Appendix-16 Index ...Index-1 iv - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 7
Booklet from Sheets...1-32 • Booklets from Facing Pages...1-35 • Memo Mode...1-38 • Batch Scanning...1-40 • Proof Mode...1-41 • Repeat Copy...1-42 • Backing Sheets for Transparencies...1-46 • ...1-56 • Programmed Copying...1-57 • Assigning Register Keys...1-60 • Programming Multi-Part Jobs...1-62 1-1 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 8
Copying Functions Paper Source Switch the paper supply to the MP tray or different cassettes to select paper of different sizes. Follow the steps as below to select the paper source. 1 Place the originals in the document processor or on the platen. When [APS] is selected, paper matching the size - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 9
sizes which you enter width and length. • Custom Size - Non-standard sizes which you enter and register as custom sizes. For instructions on registering original sizes Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program 4 Select the original size. - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 10
Others stand.Size]). Ready to copy. Select Original Size Combine Batch Scanning Form Overlay Booklet Program Shortcut Select size Input size Other stand. key to start copying. Input Size Follow the steps as below to enter the original size which is not included in the standard sizes. 1 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 11
297 mm (in 1-mm increments) Shortcut (2 17) X " Paper Size 11x8½ 100% Back Set original on platen and scanning range. (Y side, X With metric models, you can enter the size directly using the numeric keys after pressing [#-Keys]. 6 Press [+] and [-] to specify the horizontal size (X). Ready - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 12
the registered custom size. y to copy. Size Shortcut Auto 11x17" 8½x11" 11x8½" 8½x14" 5½x8½" 8½x5½" 11x15" 8½x13½" 8½x13" A4 A4 Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down Paper Size Set 11x8½" 100% Back Close Custom Size 2x2" 2x2" 2x2" 2x2 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 13
the copy quantity. 1 Place the originals in the document processor or on the platen. 2 Use the numeric keys on the operation to copy. panel to enter the desired copy quantity. The copy quantity will be displayed at the top right corner of the touch panel. NOTE: To clear the copy quantity - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 14
Copying Functions Original Orientation Specify the original orientation to use these functions. • Duplex mode • Split mode (separate copies from two-sided originals) • Margin mode • Centering originals • Border erase • Combine mode • Memo mode • Page numbering • Booklets • Stapling (optional feature - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 15
3 Press [Orig. Set Direction]. Copying Functions Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down Basic 4 Press [Top Edge] ([Back Edge]) or - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 16
different cassettes with portrait and landscape orientations. The supported paper sizes are 11 × 8 1/2", A4, Ready to copy. Sort/Offset Sort Offset Combine Batch Scanning Form Overlay Booklet Program Shortcut Paper Size 11x8½ the numeric keys to enter the copy quantity. 5 Place the originals in - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 17
Stapling Copying Functions You can staple sets of copies. NOTE: Stapling requires the optional document finisher. The orientations of the original and corresponding staple positions are as follows. Originals Copies Orientation of Original Platen Document Processor One staple Two staples ( - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 18
Edge 5 Place the originals in the document processor or on the platen and press the Start key. If the original is placed on the platen, Scan next original(s) will be displayed. Place the next original and press the Start key. After - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 19
Punching Copying Functions Punch holes in sets of finished copies in preparation for binding. NOTE: Punching requires the optional document finisher and punching unit. The orientations of the original and corresponding punch positions are as follows. Originals Copies Orientation of Original - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 20
Copying Functions 3 Press [2 holes] or [3 holes] for the inch model. Press [2 holes] or [4 holes] for the metric model. Ready to copy. Staple/Punch Staple Punch Shortcut None 1 staple 2 staples None 2 holes 3 holes Paper Size 11x8½ 100% Back Select Original Im Direction. Top Edge 4 Select - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 21
Copying Functions Combine Mode Images from either two or four originals are reduced and combined onto a single copy. The page boundary of each original can be indicated by a solid or dotted line. NOTE: Combine mode is available for the copy paper sizes of A3, B4, A4, A4R, B5, B5R, 11 × 17", 11 × 8 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 22
Copying Functions 4-in-1 Mode For copying four originals onto a single sheet. This mode can be used with Duplex mode to copy eight originals onto one sheet. The orientations of the original and corresponding output are as follows. Originals Copies Orientation of Original Platen Document - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 23
/Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Ready to copy. Combine Combine Batch Scanning Form Overlay Booklet Program Shortcut Paper Size 11x8½ 100% Up Down Paper Size 11x8½ 100% Back None 2 in 1 4 in 1 2 or 4 original pages - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 24
on the left (right) or top (bottom) side. The supported margin width is as follows. Margin Width Inch models Metric models either the rear or the left side of the copier. 2 Press [Function]. 3 Press [Margin/ Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 25
Copying Functions 7 Press [Auto] or [Front/Back margin]. [Auto] specifies the margin on the back side automatically based on the front margin. If you choose [Front/Back margin], use [S], [T], [W] and [X] to specify the margins. Ready to copy. Back page margin Auto Front/Back margin If "AUTO" is - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 26
with the top edge facing either the rear or the left side of the copier. 2 Press [Function]. 3 Press [Margin/Centering] ([Margin/Imag.Shift]). originals. None Margin Auto Center to copy. ng Shortcut Able to center scanned image on paper. 6 Press the Start key to start copying. Reposition - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 27
originals. Choose from the following Border Erase modes. • Sheet Border Erase - Use this mode to erase black borders around the single sheet original. Originals Copies • Book Border Erase - Use this mode to erase black borders around the edges and in the middle of the original such as a thick - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 28
# Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8 width to erase. With metric models, you can enter the border width directly using the numeric keys after pressing around the edges of original such as a book. 1 Place the originals in the document processor - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 29
enter the border width directly using the numeric keys after pressing [#-Keys]. 6 Press the Start key to start copying. None Sheet Erase Book the rear or the left side of the copier. 2 Press [Function]. 3 Press [Border Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 30
or [-] to specify the border width to erase. With metric model, you can enter the border width directly using the numeric keys after pressing [#-Keys]. Ready to copy. Border Erase None Sheet Erase Book Erase Individual BordrErase ¼ " Top ¼ " Left Ready to copy. Individual Border Erase (0 Top - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 31
platen with the top edge facing either the rear or the left side of the copier. 2 Press [Function]. 3 Press [Page #] ([Page numbering]). Ready to copy Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down 4 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 32
or [-] to select the starting number and press [Close]. You can also enter the number with the numeric keys after pressing [# keys] ([#-Keys]). Ready to If not, go to step 15. Ready to copy. Select last page Auto Manual (0 -10) Page Paper Size 11x8 100% Back Select Original I Direction. Top - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 33
Ready to copy. You can also enter the number with the numeric keys after pressing [# keys] ([#-Keys]). Select denominator # (1 999) Auto Manual # keys Paper Size 11x8½ 100 is placed on the platen, Scan next original(s) will be displayed. Place the next original and press the Start key - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 34
Copying Functions Cover Mode Copies the first page and/or the last page onto colored paper or thick paper which is fed from a paper source other than the normal paper source. Front Cover Originals Back Cover Duplex Copy on front side Originals Duplex Copy on front side You can select not - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 35
Selection Page # Cover Mode Function 4 Press [Add Cover] and complete the front cover settings. Ready to copy. Cover Mode Front cover Combine Batch Scanning Form Overlay Booklet Program Shortcut Paper Size 11x8½ 100% Up Down Paper Size 11x8½ 100% Back No cover Add Cover Blank Front copy Back - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 36
/Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function 3 Press [On]. Ready to copy. Form Overlay Combine Batch Scanning Form Overlay Booklet Program Shortcut Paper Size 11x8½ 100% Up Down Paper Size 11x8½ 100% Back Off Use the first - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 37
Copying Functions 7 Select the form from the list and press [Close]. Back Close Form Form003 dpi Up 8½x11" Form002 8½x11" Form001 8½x11 Down The arrow means direction of registered form. Set original and form directions. 8 Place the original for the form on top of the other originals - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 38
document finisher, you can staple the booklet in the center margin. If the copier is also equipped with a folding unit, you can combine a center margin with folding at the center. The following paper sizes are supported when stapling the center margin or combining a center margin with center folding - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 39
Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down 1-33 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 40
. 2 sided mode. Booklet Original Finished None Booklet Book Booklet 1 sided 2-sided Left/Right 2-sided Top/Bottom and you can specify center margin stapling. If the copier is also equipped with a folding unit, you can platen, Scan next original(s) will be displayed. Place the next original and - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 41
copier is also equipped with a folding unit, you can combine a center margin with folding at the center. The following paper sizes are supported when models Supported Paper Sizes 11 × 17", 8 1/2 × 14" and 8 1/2 × 11" A3, B4 and A4R Copying on covers The original for the cover is scanned first. - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 42
]) will be displayed and you can specify center margin stapling. If the copier is also equipped with a folding unit, you can specify folding along the the front cover, follow the instruction. On 1.Scan front cover book original. 2.Start scan book originals. Paper Size 11x17 100% Back Set the - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 43
Copying Functions 9 Press the Start key to start scanning the original. Scan next original(s) is displayed. Place the next original and press the Start key. After scanning all originals, press [Scanning finished] to start copying. 1-37 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 44
Copying Functions Memo Mode Delivers copies with a space for adding notes. You can also copy two originals onto the same sheet with a space. NOTE: Memo mode is available for the copy paper sizes of A3, B4, A4, A4R, B5, B5R, 11 × 17", 11 × 8 1/2", 8 1/2 × 11", 8K and 16K. Layout A Reduces images - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 45
line. 6 Place the originals in the document processor or on the platen and press the Start key. If the original is placed on the platen, Scan next original(s) will be displayed. Place the next original and press the Start key. After - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 46
each set with the document processor. In Batch Scanning mode, you can continue scanning originals until you press [Scanning finished]. Follow the steps as below to use batch scanning. 1 Press [Function]. 2 Press [Batch Scanning]. Ready to copy. Select Paper Exposure Mode Orig.Image Quality Sort - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 47
volume copy job to check before approving the job. If there are any problems with the copy, simply cancel the job to avoid wasting paper. Follow retry, press "Cancel" key. e to print, press "Start" key. The copier will remain in standby mode until the job is approved or cancelled. Count/Set Check - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 48
available when the copier is equipped with the optional security kit. Depending on your ]) and enter the pass code. NOTE: Enter the pass code from 1 to 8 digits. If you forget the pass code, Repeat function, jobs can be recalled and output. Individual passwords can be set. 4 Place the originals in - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 49
the Repeat Copy key to list the Repeat Copy jobs and review the list of registered jobs. You can view, print, and specified a pass code. Use the numeric keys to enter the pass code and press [Enter]. e-print code. Reprint Delete Check Details Stop Clear (Enter by #key) Enter 3 Press [+] - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 50
will be displayed if you specified a pass code. Use the numeric keys to enter the pass code and press [Enter]. e-print code. Clear (Enter by #key) Stop Enter 3 Check the job. Press [Print from 1st] ([Head Print]) to print the first page for reviewing. Check Details / Reprint Item User name Job - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 51
Deleting Repeat Copy Jobs Follow the steps as below to delete registered Repeat Copy jobs. 1 Press the Repeat Copy key. Copying Functions 2 Select the job to delete and press [Delete]. Repeat Copy Job User Original Set Registration Type Norm. Copy Norm. Copy Repeat Copy 3 Press [Yes] to - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 52
changed to [Transparency]. When installing the optional document finisher, you may need to specify the output destination for finished copies. For instructions, refer to Selecting Output Destination on page 3-29. Copying on Backing Sheets Copies the same image as the transparency onto the backing - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 53
4 Press [OHP Backing] ([OHP Back]). 5 Press [Copy] or [Blank]. 6 Press the Start key to start copying. Copying Functions Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 54
Refer to Selecting Auto Rotation on page 3-14. The following paper sizes can be used in Auto Rotation mode. Inch models Metric models Supported Paper Sizes 11 × 8 1/2", 8 1/2 × 11" and 5 1/2 × 8 1/2" A4, A4R, B5, B5R, A5R, B6R, A6R and 16K Follow the steps as below for automatic rotation. 1 Press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 55
Copying Functions Output Destination Particular trays of the document finisher or multi-job tray can be specified as the output destination for completed copies. Destination Auto Tray A Tray B Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Description Copies are sent to an empty tray. If multiple trays are - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 56
Copying Functions EcoPrint Mode Helps reduce the toner used for copies. Use this mode when high-quality to activate EcoPrint mode. to copy. User choice Function Shortcut EcoPrint mode saves toner. Output will be lighter. Program Paper Size Set 11x8½" 100% Back Close EcoPrint It is - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 57
Copying Functions Inverted Copying Inverts black and white portions of the image for copying. Follow the steps as below for inverted copying. 1 Press [Function] and then [T Down]. 2 Press [Invert]. Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 58
Copying Functions Mirror Image Copies the mirrored images of the original. Follow the steps as below for mirror image copying. 1 Press [Function] and then [T Down]. 2 Press [Mirror Image]. Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 59
, scans originals of different sizes for automatic copying onto paper sizes matching each original. NOTE: In this mode, up to 30 originals of different sizes can be placed in the document processor at the same time. Originals of the Same Width Place all originals of the same width. The supported - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 60
is only available for metric models. The supported combinations of originals are as follows. • A3, B4, A4 and B5 • B4, A4R and B5 • Folio, A4R and B5R NOTE: Place originals flush against the document width guide toward the back of the copier. IMPORTANT: When placing the originals of different - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 61
. Auto Selection Shortcut Paper Size 11x8½ 100% Back Off Auto selection Scan mixed sized originals using the Document Processor. Copy size is same as to same size as origina using the Document Processor See the Operation Guide for usable original sizes and procedu 5 Press the Start key to - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 62
Copying Functions Multi-Page Forms Using the document processor, multiple originals bound together, such as accounting forms, are scanned as a single original. NOTE: Place the original forms one by one in the document processor. Insert originals binding side first in the document processor. Follow - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 63
No registration No registration No registration No registration No registration No registration No registration 4 Enter the program name and press [End]. NOTE: For instructions on entering characters, refer to Entering Characters on Touch Panel on page 3-55. 5 Press [Yes] to register the program - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 64
in 1 Register Delete Margin Left Sheet Erase Change Name No registration 4 Enter the new program name and press [End] to register the program with the new name. NOTE: For instructions on entering characters, refer to Entering Characters on Touch Panel on page 3-55. Name to display Stop Limit - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 65
Copying Functions Deleting Programs Follow the steps as below to delete programs. 1 Press [Program]. 2 Press [Delete]. to copy. 3 Press the number (1 to 8) of the program to delete. User choice Function Program Delete registration Select the number of program to delete. Paper Size Set - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 66
Copying Functions Assigning Register Keys Assigns three frequently used functions listed on the [Function] screen to register keys. You can also assign functions on the [Basic] screen and the [User choice] screen. Assigning Register Keys Follow the steps as below to assign register keys. NOTE: - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 67
Deleting Register Keys Follow the steps as below to delete register keys. 1 Press a registered register key to display the assigned function. 2 Press [Shortcut] ([Register]) to display Create Shortcut (Register). Ready to copy. Combine Layout 3 Press [Delete]. None 2 in 1 4 in 1 Select item. - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 68
Copying Functions Programming Multi-Part Jobs Using job build, individual sets of originals are scanned in separate steps for a single copy job. In each step of the scanning process you can specify different settings (such as zooming and border erase) and you can specify different types of originals - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 69
Finished page #: Back Off Repeatcopy allows sets to be save to the HDD. On Using Repeat Copy function, jobs can be recalled and output. Individual passwords can be set. 1-63 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 70
key. Select Paper 11x8½" Plain 11x8½" Recycled 11x17" Plain 8½x11" Plain MP tray Color 8 Place original A and press the Start key to start scanning. 2 sided copy-Left Finished page #: Back Step 2: Specify that the back of original A will be left blank. 9 Press [Print from Front page]. riginal - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 71
copy. Select Paper 11x8½" Plain 11x8½" Recycled 11x17" Plain 8½x11" Plain MP tray Color 15 Place original C and press the Start key to start scanning. 2 sided copy-Left Finished page #: Next copy page: Front Back Step 5: Specify that the back of original C will be left blank. 16 Press [Print - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 72
copy. Select Paper 11x8½" Plain 11x8½" Recycled 11x17" Plain 8½x11" Plain 11x8½" Color 19 Place original D and press the Start key to start scanning. 2 sided copy-Left Finished page #: Next copy page: Front Back Step 7: Specify blank colored paper for the back cover. Specify the MP tray - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 73
23 All originals have been scanned. Press [Scanning finished] to start the job. 24 If there are no problems with the accomplished copies, of Originals Select originals that are one-sided or two-sided, have facing pages like books or magazines, or are like multi-page business forms. 1 On the [Basic] - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 74
press Start key. select the binding direction. 1 sided/2 sided Copy Follow the instructions on the right side Finished of the touch panel and confirm the orientation of place originals correctly may result in copying errors. Open from top B ack Select Original Ima Direction. Top Edge 3 Press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 75
Copying Functions Processing of Finished Copies Specify stacking of accomplished copies as follows. If your copier is equipped with the optional document finisher, you can also specify stapling or hole punching. Function Stacking Stapling Center margin stapling Punching Optional Equipment - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 76
. NOTE: Failure to place originals correctly may result in copying errors. 4 Press [Close]. Reducing/Enlarging Select the desired magnification as 2 Select the desired magnification. Ready to Job build. For instructions on reducing/enlarging, Place originals then press Start key. refer - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 77
corner]). tion NOTE: Failure to place originals correctly may result in copying errors. "Select Original Image Direction." can be shown at right side of display Job build. Place originals then press Start key. manually, press [Manual]. Next, press Exposure Mode B ack [Lighter] or [ - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 78
to copy or with mixed text and photo. Photo: For copying photo and pictures Text: For copying text pages 3 Press [Close]. EcoPrint To economize toner, specify EcoPrint as follows. 1 Press [Quality]. On the next screen, press [EcoPrint]. NOTE: The setting for EcoPrint applies to all other steps - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 79
Copying Functions Border Erase Prevents the appearance of shadows from around the edges of originals. 1 Press [Edit]. On the next screen, press [Border Erase] ([Erase Mode]). Ready to Job build. Place originals then press Start key. Job Build Step Off Border Erase None Margin/ Centering Basic - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 80
]. None Margin Auto Center Repeat copy allows sets to be save to the HDD. Using Repeat Copy function, jobs can be recalled and output. Individual passwords can be set. 1 sided copy-Left Finished page #: B ack Reposition image to left/right or top/bottom, and also center image on paper. 1-74 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 81
A Select of Output Edit 1 sided copy-Left Finished page #: 2 For instructions on page numbering, refer to Page Numbering on page 1-25. Ready to Job : The option to select the output destination is displayed only if the copier is equipped with the optional document finisher or multi-job tray. The - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 82
Copying Functions 1-76 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 83
2 Document and Output Management Functions This chapter explains the functions used for managing original documents as well as jobs during and after copying. • Document Management Functions...2-2 • Output Management Functions...2-16 2-1 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 84
enable you to store documents (i.e., scanned images of originals) on the copier's hard disk for printing later. ox Editing 3 Press [Change Name] and enter the form name. For instructions on entering characters, refer to Entering Characters When Using Document Management Functions on page - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 85
scanning is complete, the touch panel will return to the Document Management screen. To register another form, switch the original and repeat steps 2 to 5. Reviewing form name] and enter the new form name. For instructions on entering characters, refer to Entering Characters When Using Document - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 86
Document and Output Management Functions Deleting Forms Delete unnecessary forms. 1 Press the Document Management key. 2 Under the Form Box, press [Box Editing]. function. agement Synergy Print Box 08/08/'04 05:34 End Form box Document Printing Document Input Box Editing Document Printing - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 87
enter the document name. For instructions on entering characters, refer to Entering Enlarge Quality 4 Complete the scanning settings required for the press [Document Properties] ([Check/Rev. Details]). Refer to Reviewing and Renaming Documents on page 2-6. Document Printing Document Data Box - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 88
doc. name] and enter the new document name. For instructions on entering characters, refer to Entering Characters When Using Document Shared Data Box - Box Editing Change doc. name Print from 1st 5 After reviewing the document, press [Close]. The touch panel will return to the screen from - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 89
Document and Output Management Functions Deleting Documents Delete unnecessary documents in the Shared Data Box. 1 Press the Document Management key. 2 Under Shared Data Box, press [Box Editing]. Select function. Document Management Shared Data Box Synergy Print Box 08/08/ Form box Document - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 90
in the Synergy Print Box as a single job. If the copier is equipped with the optional printer kit, you can also register printing data in the Synergy Print Box. For further details, refer to the Operation Guides of the printer. The Synergy Print Box holds 100 individual boxes (numbered 001 to - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 91
enter the password and press [Enter]. NOTE: For instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter by #key) Stop Enter [Z J A]). Documents registered from scanned originals are indicated by before the Refer to Reviewing and Renaming - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 92
Print Box If a password has been set up for the box, a screen for password entry will be displayed. Use the numeric keys to enter the password and press [Enter]. NOTE: For instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter by #key) Stop - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 93
/ Cancel Cancel Print once all data Finish selecting Reviewing and Renaming Documents Check the size, registering date enter the password and press [Enter]. NOTE: For instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter by #key) Stop Enter - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 94
6 After reviewing the document, password has been set up for the box, a screen for password entry will be displayed. Use the numeric keys to enter the password and press [Enter]. NOTE: For instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 95
Print Box If a password has been set up for the box, a screen for password entry will be displayed. Use the numeric keys to enter the password and press [Enter]. NOTE: For instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter by #key) Stop - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 96
touch panel will return to the Document Management screen. Specifying Box Passwords Specify passwords to maintain the confidentiality of documents stored in the Synergy Print Box. The passwords must be entered to review, print, or delete the documents. 1 Press the Document Management key. 2 Under - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 97
be from 1 to 8 digits long. If you prefer not to specify a password, press [Clear], and, without having entered any password, press [Enter]. New password Clear (Enter by #key) End Delete all Data/Box Box Password Stop Enter 6 Press [End]. The touch panel will return to the Document Management - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 98
. You want to know the status of jobs sent You can check the status of these jobs just as you would from a computer using the copier's printer copy jobs, on the [Prt Status] ([Prnt Status]) screen. functions. Completed or canceled jobs are listed on the [Job History] screen. (In the list, copy - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 99
Document and Output Management Functions Using Output Management Functions Manage jobs using output management functions from the [Prt Status] ([Prnt Status]) and [Job History] screens. Press the Print Management key to display the [Prt Status] ([Prnt Status]) screen. To display the [Job History] - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 100
Document and Output Management Functions [Job History] Screen The screen lists completed and/or canceled jobs. Print Management End 4 Job User Original Set Registration Res. Stop 1 End 3 End End Check Details 5 Prt Status Job History 2 1 Job List: Provides completed job - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 101
3 System Settings This chapter covers how to configure various settings of the copier using the menus on the operation panel. The main configurable settings are as • Printing Reports...3-50 • Checking Total Copy Count...3-53 • Refreshing the Drum...3-54 • Entering Characters on Touch Panel...3-55 3-1 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 102
which are applied when the copier is powered up or the Reset key is pressed. You can customize the initial state of the copier to meet your needs. Scanning Text Documents...3-11 • Adjusting Manual Exposure: Text+Photo Mode...3-12 • Adjusting Manual Exposure: Text Mode...3-12 • Adjusting Manual - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 103
optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model. Proceed to the following sections to customize individual settings. Exposure Mode Exposure mode changes the default for how the copier adjust - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 104
. Exposure Steps You can change the number of intermediate steps for manual adjustment of exposure. Selecting [1 step] provides 7 steps of slider for finer adjustment of exposure. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 105
Original Image Quality EcoPrint Background exp. adj. System Menu Setting mode Manual 1 step Text + Photo Off Standard Change # 3 Select [Text of toner consumed on the page saving the copying cost. Choose whether to select EcoPrint on or off. 1 Access the Copy Default screen. (For instructions, - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 106
Original Image Quality EcoPrint Background exp. adj. System Menu Setting mode Manual 1 step Text + Photo Off Standard Change # 3 Press [ are somewhat lighter in this mode. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 107
size of the original document or the copy paper in the default cassette is forcibly selected. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Select Paper and press [Change #]. System Menu / Counter Copy - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 108
the type of paper when the copier automatically selects the copy paper according to specified from the following types of paper supported. Plain, Transparency, Rough, Vellum, for details. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 109
NOTE: The MP tray is not available for the default cassette. [5th paper] is available when the copier is equipped with an optional side feeder. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Default drawer - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 110
not match, this determines whether the original is automatically zoomed to fit onto the copy paper. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Auto % Priority Setting and press [Change #]. System Menu - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 111
the best readability is obtained when the scanned image is printed and processed with an OCR software application. NOTE: This setting is available only if the copier is equipped with the optional scanner kit. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 112
documents containing both text and photo images. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Adj. Manual expo.(Mixed) and press [Change #]. System Menu / Counter Copy Default Default menu Default - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 113
optimizes for copying documents containing photo images. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Adj. Manual expo.(Photo) and press [Change #]. System Menu / Counter Copy Default Default menu Auto - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 114
as the default output. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press Menu / Counter Copy Default Default menu Adj. Manual expo.(Mixed) Adj. Manual expo.(Text) Adj. Manual expo.(Photo) Reduce/Enlarge Sort/Offset System Menu - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 115
[Change #]. System Menu / Counter Copy Default Default menu Adj. Manual expo.(Photo) Reduce/Enlarge Sort/Offset Auto Rotation Default margin width width for erasing borders. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 116
# 3 Use the numeric keys to enter the Preset limit B ack maximum number copier. You can enable or disable repeat copy and set it as the default. NOTE: This menu is not available when the copier is equipped with the optional security kit. 1 Access the Copy Default screen. (For instructions - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 117
mode. The [Job History] screen provides information on the completed jobs in the copier. For details, refer to Output Management Functions on page 2-16. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 118
frequently used functions listed on the [Function], [Basic] and [User choice] screens to the preset keys. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Display register key (Display"Register"key) and press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 119
Functions screen to your preference. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or Mode None Select Paper Original size Combine Auto Selection Batch Scanning - Copy Default 4 Press [Close]. The touch panel will return - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 120
The following are the settings configured for changing the defaults of the copier. • Enabling Auto Cassette Switching...3-21 • Selecting Paper Size...3-22 31 • Setting Time Difference (Time Zone)...3-32 • Changing Management Code...3-32 • Activating Auto Sleep...3-33 • Activating Auto Clear...3-34 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 121
kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for the 80 cpm model. Proceed to the following sections to customize individual settings. Enabling Auto Cassette Switching If the cassette in use runs out of paper, the copier - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 122
support the following paper types. Plain, Recycled, Preprinted, Bond, Color (Colour), Letterhead, Thick paper, High Quality and Custom 1-8 NOTE: 5th drawer (5th cassette) is available when the copier is equipped with the optional side feeder. 1 Access the Machine Default screen. (For instructions - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 123
for copying. This allows to quickly configure the MP tray settings by changing paper size, etc. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Check MP tray sizing and press [Change #]. System - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 124
whether duplex copying is allowed to custom paper type. Up to 8 custom paper types are configurable. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Select paper type(2sided) and press [Change - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 125
each other. By switching [Adj(usting). Print Direction] on, the copier correctly prints the original onto the letterhead paper when the original and (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Special paper action mode (Specif. paper - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 126
available for metric models. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 is automatically zoomed to the currently selected paper ([On]) or the copier halts and prompts you to investigate the size of the original document - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 127
enters sleep mode. The Sleep timer can be set from 1 to 240 minutes in 1-minute increments. NOTE: If the copier is used frequently, we recommend using a longer timeout. If it is used infrequently, use a shorter timeout. 1 Access the Machine Default screen. (For instructions, refer to Accessing - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 128
Low-Power Timer Timeout Specifies the period of time before the copier enters Low-Power mode. The Low-Power time can be set from 1 to 240 minutes in 1-minute increments. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 129
. Tray 5 (the fifth tray) of the multi-job tray. NOTE: This menu is available when the copier is equipped with the optional document finisher. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Select - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 130
will return to the Machine Default screen. Enabling Silent Mode The silent mode lets the copier deactivate the ventilating fans for quieter operation. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 131
: Before proceeding to adjust the date and time, complete Setting Time Difference (Time Zone) on page 3-32. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Date/Time and press [Change #]. System Menu - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 132
Time. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page code must be a number comprising of four digits from 0000 to 9999. When installing the optional security kit, enter the eight-digit management code. By default, the management code - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 133
09:00 3 Use the numeric keys to enter the new management code. Management code change Able to change management code.(# key) Change # B ack System Timeout on page 3-27. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 134
activated, the copier reverts to the state after warm-up if no copies are made. 1 Access the Machine Default screen. (For instructions, refer to is displayed when installing the optional printer kit. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 135
: For details on methods of hard disk overwriting, refer to the security kit Operation Guide. This setting is available only if the copier is equipped with the optional security kit. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 136
. 3-36 NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for the 80 cpm - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 137
17:00-OFF Change # Up Down 3 To turn on and off the copier at a specific Monday Back time of day, press [Select work time]. Set the timer to Timer for the specific day. The timer resumes on the following day. 1 Access the Weekly timer (Week timer) screen. (For instructions, refer to Accessing - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 138
System Settings Weekly Timer On/Off Activates and deactivates the Weekly Timer. 1 Access the Weekly timer (Week timer) screen. (For instructions, refer to Accessing the Weekly timer (Week timer) Screen on page 3-36.) 2 Select [On] to activate or [Off] to deactivate the Weekly Timer. y timer - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 139
and the paper sizes for the MP tray. For instructions on specifying paper size, refer to Chapter 2 of the Operation Guide. Menu Unit Auto Detect Inch Centimeter Other Standard Sizes Input Size Paper Sizes Supported 11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11" and 5 1/2 × 8 1/2" A3, B4, A4 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 140
Accounting BOX Management Print Report 3 Select one of the four custom sizes available (1 to 4). Press [Change #]. 4 Press [On] to start entering the non-standard size. System Menu / Counter Register Orig. Size Default menu Original size (custom 1) Original size (custom 2) Original size (custom - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 141
7 Press [Close]. 8 Press [Close]. The touch panel will return to the System Menu screen. System Settings 3-41 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 142
. • Print Document List...3-43 • Resetting Document Box...3-45 • Specifying Name and Password to Document Box...3-45 • Deleting All code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 143
System Settings Print Document List You can print a list of documents in the Form Box, Shared Data Box and Synergy Print Box. Document List, Form Box Document List, Shared Data Box 3-43 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 144
Management screen. (For instructions, refer to Accessing the Document Management Screen on page 3-42.) 2 Press [Print the list] under the specific data box. The list Reset Box System Menu Synergy Print Box Print the list Reset B ox Box Editing Document save term Form box Print the list Reset B - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 145
Management screen. Shared Data Box Reset this Box. Do you really want to reset? Yes No Specifying Name and Password to Document Box You can name Synergy Print Box prompts you to enter the password. 1 Access the Document Management screen. (For instructions, refer to Accessing the Document - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 146
Enter the box name and press [End]. For instructions on entering characters, refer to Entering Characters When Using Document Management Functions on page 3-58. 6 Specify the password to the box. Select Password Print the list Reset Box System Menu Synergy Print Box Print the list Reset B ox Box - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 147
panel key, or enter the number using the numeric keys followed by [Enter]. Box Editing Select box No. System Settings ( 4 Press [Reset Box]. System from 1 to 7 days. 1 Access the Document Management screen. (For instructions, refer to Accessing the Document Management Screen on page 3-42.) 2 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 148
System Settings 3 Press [Set saving term] ([Set save Document data saving term B ack period]). Use [+] or [-] to specify the Set saving term for documents in synergy print box. period to store the documents from 1 to 7 days. Set saving Days term To indefinitely store the documents, No - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 149
displayed. NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for the 80 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 150
System Settings Printing Reports You can print the following reports using the operation panel. Copy status report Machine status report 3-50 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 151
coverage for printing The copying volume as calculated from information indicated on toner coverage reports will not match the guaranteed volume given on toner containers exactly. The actual copying volume supported depends on conditions of use (such as the content of copies and the frequency of - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 152
kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for the 80 cpm model. 4 Press the appropriate key that you want to print the report. The report is printed. Print Report Print Report Menu Copy Report Machine Report Toner - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 153
BOX Management Print Report End Weekly timer Counter Check User Adjustment 3 The touch panel will display the total count for copying and scanning. Copy Printer To print the total count information, press [Print Report]. Press [Close]. The touch panel will return to the System Menu screen - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 154
Report End Weekly timer Counter Check User Adjustment 4 Press [Drum refresh]. System Menu / Counter User adjustment Drum refresh System Menu 5 Press [On] to start refreshing the drum. Close Please wait approx. one minute until this e drum when image blur or white dots appear process is - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 155
Capital Letter Num./Sym. Space 2 3 4 5 1 Character display: Displays the characters entered. 2 [Capital]: Press this key to enter capital letters. 3 [Letter]: Press this key to enter lowercase letters. 4 [Num./Sym.]: Press this key to enter numbers and symbols. 5 [Space]: Press this key to - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 156
Symbol 1 Symbol 2 Space 2 3 4 5 6 1 Character display: Displays the characters entered. 2 [Capital]: Press this key to enter capital letters. 3 [Letter]: Press this key to enter lowercase letters. 4 [Symbol 1]: Press this key to enter numbers and symbols. 5 [Symbol 2]: Press this key to - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 157
Name to display Stop Limit: 32 letters inc. # key AllDel. End Del. prev Capital Letter Symbol 1 Symbol 2 Space Entering Characters The following is an example of how to enter 'Abcde' using the keyboard. 1 Press [Capital] and press [A] on the keyboard. Name to display A| Stop Limit:32 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 158
the cursor at once. 6 [Shift] key: Press this key to toggle between entry of capital letters and lowercase letters. 7 [Space] key: Press this key to enter a space. 8 [End] key: Press this key to confirm your entry. The touch panel will return to the previous screen. NOTE: Use the numeric keys to - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 159
2 Press the [a], [b], [c], [d] and [e] keys in this order. The character display field will show abcde. Enter name. Shift 3 Press the [End] key. System Settings Limit:16 letters including # Space 3-59 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 160
System Settings 3-60 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 161
4 Job Accounting This chapter explains how to manage job accounting on copier use shared among various departments. • Overview of Job Accounting...4-2 • Managing Accounts...4-4 • Copy Count per Department...4-14 • Activating and Deactivating Job Accounting...4-18 • Job Accounting Default - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 162
entering the management code. IMPORTANT: To restrict the number of copies, printouts or scanned images using job accounting, you must switch the Copy Job Accounting from [Off] to [On] as the default. If the copier is equipped with the optional printer kit or scanner kit, also activate Printer - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 163
displayed. NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for the 80 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 164
entering an account ID code (of up to eight digits), account name, and restrictions on usage as desired. Access the Job Accounting screen. (For instructions T otal System Menu Management Edit ID-Code 11111111 22222222 -------- 1st sales division 2st sales division ETC System Menu - Job 4 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 165
restrictions on copying as desired. New register 33333333 3st sales division For instructions on restricting copier usage, refer to Restricting Usage Copier on page 4-6. Setting Item Copy Printer Output limitation Scanner transmission Value Permitted Permitted No limit No limit System Menu - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 166
depending on the job accounting default settings (specifically, depending on whether you select [All] or [Each] for Copy/Printer Output Management). Refer to Copy/Printer Output Management on page 4-23 for details. Restricting a copier function includes the following configurations. Restricting - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 167
Printer Output Management:] to [All] on page 4-23. 3 Select Printer and press [Change #]. New register 33333333 3st sales division Setting Item Copy Printer Output limitation Scanner to copy and print. When the copier is installed with the optional printer kit, the restricted number of copies apply - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 168
Image You can prohibit or restrict the number of scanned pages to transfer or e-mail to PC. This function is available when the copier is equipped with the optional scanner kit. NOTE: Turn Scanner Job Accounting [On] in the job accounting default settings to use this function. 1 Refer to steps - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 169
number of copies for Scanner transmission B ack scanning, press [Counter limit] and use the numeric keys to enter the number of copies Copy and press [Change #]. New register 33333333 3st sales division Setting Item Copy Printer Scanner transmission No limit No limit No limit Value Change # - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 170
copier when it is equipped with the optional printer kit. NOTE: Turn Printer Printer Output Management:] to [Each] on page 4-23. 3 Select Printer and press [Change #]. New register 33333333 3st sales division Setting Item Copy Printer Scanner Accounting screen. (For instructions, refer to Accessing - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 171
1st sales division Are you sure you want to delete this Account ID? Yes No 5 Press [Close]. The touch panel will return to the Job Accounting screen. Editing Department Information Changes the name and ID code registered for the department. 1 Access the Job Accounting screen. (For instructions - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 172
on page 4-19 for details. If the copier is equipped with the optional printer kit and/or the scanner kit, activate Printer Job Accounting and Scanner Job Accounting in the job accounting default settings. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 173
Menu 3 Select the department ID code to change and press [Limit in use]. it 1 1st sales division 2 2st sales division ETC - Job Up Down copier usage, refer to Restricting Usage Copier on page 4-6. Limit in use 11111111 1st sales division Setting Item Copy Printer Output limitation Scanner - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 174
. The total copy count can be reset as necessary. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen Report by Function] to count a list of reports by function. Copy Printer scanner Total Counter clear Print Report Press [Report by Size] in the - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 175
Output Management of the job accounting default settings. 4 To reset the copy volume, press [Counter clear]. otal Copy Printer Total Close 5 Press [Yes]. scanner - Job Accounting Counter clear Print Report The counted number for this ID-code will be deleted Are you sure? Yes No 6 Press - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 176
Each Management Total Number print. Black & White: Copy Scan. Transm. Scan # pages: scanner System Menu - Job Accounting 5 To reset the copy count, press [Counter ent Total clear]. Copy Printer Printer T otal Num is lim Total 11111111 1st sales divisi Close Number in( ) is limit value - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 177
6 Press [Yes]. Job Accounting The count value of this ID-code will be deleted Are you sure? Yes No 7 Press [Close]. 8 Press [Close]. The touch panel will return to the Job Accounting screen. 4-17 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 178
activated. Job accounting is deactivated. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 Select [On] [On], the screen for the department ID-code entry is displayed. When you select [Off], the [Basic] screen is displayed. 4-18 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 179
Accounting is deactivated. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 Job Accounting Print. Job Accounting Printer error report Others Mgt. Reg. (print) Copy/Printer output mgt. Scanner Job Accounting Excess of limit Setting - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 180
only if the copier is equipped with the optional printer kit. 1 Access the Job Accounting screen. (For instructions, refer to Accessing Job Accounting Print. Job Accounting Printer error report Others Mgt. Reg. (print) Copy/Printer output mgt. Scanner Job Accounting Excess of limit Setting - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 181
codes. Setting On Off Description Prints an error report. Does not print an error report. NOTE: This setting is displayed only if Printer Job Accounting is [On]. 1 Access the Job Accounting screen. (For instructions Printer error report Others Mgt. Reg. (print) Copy/Printer output mgt. Scanner - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 182
print from computers with printer drivers that do not support job accounting. Users cannot print unless their printer driver supports job accounting. NOTE: This setting is displayed only if Printer Job Accounting is [On]. 1 Access the Job Accounting screen. (For instructions, refer to Accessing - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 183
Scanner Job Accounting Activate or deactivate job accounting when the copier is used for scanning. Setting On Off Description Scanner Job Accounting is activated. Scanner Job Accounting is deactivated. NOTE: This setting is displayed only if the copier is equipped with the optional scanner kit - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 184
Copy Job Accounting Print. Job Accounting Printer error report Others Mgt. Reg. (print) Copy/Printer output mgt. Scanner Job Accounting Excess of limit Setting message is displayed. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 185
For instructions, error report Others Mgt. Reg. (print) Copy/Printer output mgt. Scanner Job Accounting Excess of limit Setting Def. Val. of coun. Limit Value On Off Off All On Stop after job done System Menu - Job Accounting - Job Accounting Def set. Change # 4 Use the numeric keys to enter - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 186
the second entry. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 job done 11x17" 8½x14" 8½x11" 11x8½" 5½x8½" No specif. No specif. No specif. No specif. No specif. System Menu - Job Accounting - Job Accounting Def set. Change - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 187
6 To specify a paper type, press [Select Paper Type]. tals of paper size and type. Paper Size 11x17" Select size Back Paper Type Close With no specif. Select Paper Type - Job Accounting - Job Accounting Def set. Select the paper type and press [Close]. Select Paper Type B ack With no - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 188
to the [Basic] screen. NOTE: If you enter the code Clear incorrectly, press [Clear] to reenter the correct code. Entering an invalid department ID-code will trigger an error alarm. Use the numeric keys to enter the correct code. You can review the department's copy count by pressing [Each Mgt - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 189
Appendix The appendix covers the following topics. • Paper...Appendix-2 • Specifications...Appendix-9 • Intercompatible Functions...Appendix-12 • Glossary...Appendix-16 Appendix-1 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 190
and contains low levels of paper dust. We are not responsible for problems that occur from the use of paper that does not conform to our specifications. Supported Paper Use standard copy paper for regular copiers or laser printers. The copy quality will be affected by the quality of paper. Poor - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 191
cause jams and shorten the useful life of the copier. Choose paper with a smooth and even from the heat of copying and may damage the drum. Be sure to use standard paper that contains at cotton or other fibers. Supported Paper Sizes Paper of the following sizes is supported by the cassettes and - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 192
) of paper cut to the standard size (or trade size) for a specific grade of paper. Paper that is too heavy or too light may be copier. Mixed paper weight (i.e., thickness) may cause several sheets to be supplied at once accidentally and may also cause blurring or other copying problems if the toner - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 193
toner adheres. Choose paper that can be discharged quickly so that copies do not cling together. Whiteness: Paper whiteness affects copy contrast. Use whiter paper for sharper, brighter copies. Quality: Copier problems even if it conforms to the basic specifications. When you use these kinds of paper - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 194
choose that are designed specifically for copiers or page printers (such as laser printers). Use the MP tray copier, copy quality will vary considerably due to differences in the construction and quality of special paper. Thus, special paper is more likely than regular paper to cause copying problems - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 195
adhesive is exposed after the top layer is peeled off. Serious damage may be caused if the paper covering the adhesive comes off in the copier. Do not use envelopes with certain special features. For example, do not use envelopes with a grommet for winding a string to close the flap or envelopes - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 196
in the paper must be able to withstand the heat of copying (up to 200 °C or 392 °F). Preprinted Paper Preprinted paper must conform to the specifications listed on the page 2 of the Appendix. The colored ink must be able to withstand the heat of copying. It must be resistant to silicone - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 197
NOTE: These specifications are subject to change without notice. Appendix Copier Copying System Indirect electrostatic system Originals Supported Sheets, books, and three-dimensional objects (maximum size: A3) Copy Sizes Cassettes 1 and 2 Cassettes 3 and 4 MP Tray Duplexing Non - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 198
from the platen) 2.9 sec or less (1:1, 11 × 8 1/2"/A4, from the platen) Scanning: 600 × 600 dpi Copying: Equivalent to 1,800 × 600 dpi 1 to 9,999 sheets preset zoom levels Optional Side Feeder Paper Supply Method Paper Size Supported Paper Dimensions (W) × (D) × (H) Weight Pneumatic supply system - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 199
Weight Approx. 160.6 lbs./Approx. 73 kg Environmental Specifications Noise emission During standby 61 dB or less (L wa default settings, copier 8 w only) During the Sleep mode (with optional printer) 24 w Supports recycled paper made from 100 % recycled pulp NOTE: Consult your Dealer or Service - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 200
full-featured copier with an J 2-sided Duplex mode: Book J 2-sided Split mode: 2-sided J 1-sided Split mode: Book J 1-sided Original size Manual Exposure mode Actual size (100 %) XY zoom Auto zoom Manual zoom Auto Selection mode: Same width Auto Selection mode: Different widths Batch scanning - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 201
Border erase: Sheet erase Border erase: Book erase Border erase: Separate border erase Auto zoom Y Y Y Y Y Y Y Y Y Manual zoom Y Y Y Y Y Y Y 36 Y Auto Selection mode: Same width Y Y 12 Y Y 12 12 36 Y Auto Selection mode: Different widths Y Y Y Y Y Y Y Y Y Batch scanning Y Y Y Y Y Y Y Y Y Image - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 202
Repeat copy: Outputing a job Programming multi-part jobs: Step 1 Programming multi-part jobs: Step 2 and thereafter Scanner functions: Send to computer Scanner functions: Send email Scanner functions: TWAIN Scanner functions: Connect to database NNNNNNNYYYYNYYYYYYNNNYYYNN NYNNNYYYYYYNYYYYYYNNYYYYNN - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 203
Book part jobs: Step 2 and thereafter N N N N N Y Y Y N N N N N N N N Y N N N N N N N N Scanner functions: Send to computer N N N N N Y Y Y N N N N N N N N Y N N N N N N N N Scanner functions: Send email N N N N N Y Y Y N N N N N N N N Y N N N N N N N N Scanner available with batch scanning. 34 Not - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 204
Mode A mode designed for electrical power saving, activated when the copier is left unused for a specific period. In Sleep mode, power consumption is kept to a inch (25.4 mm). EcoPrint Mode A copying mode that helps conserve toner. Copies made in this mode are thus lighter than normal. MP Tray The paper - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 205
scanning text documents 3-11 Adjusting background intensity 3-6 Adjusting date and time 3-31 Adjusting manual exposure: Photo mode 3-13 Adjusting manual exposure: Text mode 3-12 Adjusting manual 46 Batch scanning 1-40 Book border erase 1-21, 1- 3-26 Changing management code 3-32 Enabling auto - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 206
3-58 Entering characters when using document management functions 3-58 Input screen 3-55, 3-58 Envelopes Appendix-7 Environmental specifications Appendix-11 Erasing borders 3-15 Exposure mode 3-3 Exposure steps 3-4 F Form Box 2-2 Deleting forms 2-4 Registering forms 2-2 Renaming forms 2-3 Reviewing - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 207
Copier 4-6 Job accounting default settings 4-19 Copy job accounting 4-19 Copy/Printer output management 4-23 Default of copy limitation 4-25 Printer job accounting 4-20 Printing from unregistered sources (printer) 4-22 Reports on printing errors 4-21 Response to unauthorized requests 4-24 Scanner - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 208
screen 3-42 Box names 3-45 Box passwords 3-45 Deleting all documents in Box 3-46 Print document list 3-43 Resetting document box 3-45 Specifying period to Renaming documents 2-6 Reviewing documents 2-6 Sheet border erase 1-21, 1-22 Side feeder Appendix-10 Specifications Copier Appendix-9 Copying - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 209
For best results and machine performance, we recommend that you use only our original supplies for your products. A1 - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 210
- Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 211
©2005 is a trademark of Kyocera Corporation - Kyocera KM-8030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 212
Rev.3.0 2007.3 Printed in China 302FB80042