Kyocera KM-8030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 55
Output Destination, Start, Destination, Description
View all Kyocera KM-8030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Copying Functions Output Destination Particular trays of the document finisher or multi-job tray can be specified as the output destination for completed copies. Destination Auto Tray A Tray B Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Description Copies are sent to an empty tray. If multiple trays are empty, copies are sent to the bottom tray first and higher trays thereafter. Sent to the tray A of the document finisher. Sent to the tray B of the document finisher. This tray cannot be specified when the multi-job tray is installed. Sent to the tray 1 (the first tray) of the multi-job tray. Sent to the tray 2 (the second tray) of the multi-job tray. Sent to the tray 3 (the third tray) of the multi-job tray. Sent to the tray 4 (the fourth tray) of the multi-job tray. Sent to the tray 5 (the fifth tray) of the multi-job tray. NOTE: Requires the optional document finisher and multi-job tray. You can change the default destination for copies. Refer to Selecting Output Destination on page 3-29 for details. You can check the record of where completed jobs were sent. Refer to Output Management Functions on page 2-16 for details. Follow the steps as below to select the output destination. 1 Press [Function] and then [T Down]. 2 Press [Select of Output]. Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down 3 Select the output destination for finished copies. Basic User choice Function Ready to copy. Select of Output Auto Tray A Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Program Shortcut Paper Size 11x8½ 100% Back Select proper output tray to avoid mixing jobs. You can confirm output tray with o management. 4 Place the originals in the document processor or on the platen. Press the Start key to start copying. 1-49