Kyocera KM-C2230 Fiery X3e 22C-KM Printing Guide for KM-C2230
Kyocera KM-C2230 Manual
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-C2230 manual content summary:
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 1
Fiery X3e 31C-M Color Server PRINTING GUIDE - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 2
of the Fiery X3e 31C-M Color Server for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0/ 2000/Server 2003, and Novell NetWare servers to provide printing services to users. • The Printing Guide describes the printing and scanning - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 3
, ColorWise, EDOX, EFI, Fiery, the Fiery logo, Fiery Driven, RIP-While-Print and Spot-On are registered trademarks of Electronics for Imaging, Inc. in the U.S. or otherwise), will be limited to $50. PANTONE® Colors displayed in the software application or in the user documentation may not match - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 4
purposes in support of your use of the Software as permitted hereunder. You may not copy the Documentation. You may not attempt to localize, translate, disassemble, decompile, decrypt, reverse engineer, discover the source code of, modify, create derivative works of, or in any way change any part of - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 5
regulations, including the U.S. Export Administration Regulations, (2) you transfer to the person or entity all of the Software and Documentation (including all copies, updates, upgrades, prior versions, component parts, the media and printed materials, and this Agreement); (3) you retain no copies - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 6
Rights: Use, duplication, or disclosure of the Software by the United States Government is subject to restrictions as set forth modified or superceded, the subsequent or equivalent regulation shall apply. The name of the Contractor is Electronics for Imaging. General The rights and obligations of the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 7
2003 PostScript printer driver 1-24 Viewing the copier/printer's status 1-28 Saving files to print at a remote location 1-29 Chapter 2: Printing from Mac OS Computers Printing from applications with Mac OS 8.6 or later, or Mac OS X Classic Mode 2-1 Selecting the Fiery X3e in the Chooser - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 8
options and printing from Mac OS X Native Mode computers 2-9 Defining custom page sizes 2-13 Chapter 3: Printing from UNIX Workstations Printing to the Fiery X3e 3-1 Chapter 4: Downloading Files and Fonts Using Fiery Downloader or WebDownloader 4-1 Downloading printer fonts 4-4 Managing - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 9
Hot Folder settings 7-11 Specifying Hot Folder print options 7-12 Specifying imposition options 7-14 Viewing Hot Folder Job Logs 7-16 Chapter 8: Tracking and Monitoring Jobs Accessing Fiery WebTools 8-1 Checking Fiery X3e status with the Status WebTool 8-3 Accessing information - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 10
How Fiery E-mail Service works 9-1 Printing using an E-mail Client 9-2 Job Control 9-4 Printing using the E-mail Port Monitor 9-4 Appendix A: Print Options About printer drivers and printer description files A-1 Where to set print options A-2 Print option override hierarchy A-3 Default - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 11
-select it from the Printers dialog box on Microsoft Windows computers, or in the Chooser on Apple Mac OS computers, and then print from within any application. NOTE: The term "Fiery X3e" is used in this manual to refer to the Fiery X3e 31C-M Color Server. The term "copier/printer" is used to refer - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 12
• Using Fiery Remote Scan software • Using Hot Folders • Monitoring jobs and accessing information using Fiery WebTools™ • Printing using the Fiery E-mail Service • Specifying and overriding job settings, generating a list of fonts installed on the Fiery X3e, and troubleshooting information - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 13
Windows servers connected to the Fiery X3e, see the Configuration Guide. For information about connecting to the Fiery X3e over the network, installing printer drivers, and installing Fiery® utilities, see the User Software Installation Guide. Printing from applications Once the Fiery X3e printer - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 14
noted. TO SET PRINT OPTIONS FOR A SPECIFIC WINDOWS PRINT JOB USING THE PCL OR POSTSCRIPT PRINTER DRIVER 1. Choose Print in your application. 2. Select the Fiery X3e PS or PCL as your printer and click Properties. 3. Click the Fiery Printing tab. Job Templates, see page 1-7 Print option bars, see - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 15
printed. Otherwise, an error is generated, and your job is placed in the printed queue. The Administrator or Operator can edit the Group Name and Group Password from the Command WorkStation/Command WorkStation LE Job Properties dialog box on the job management tools, see the Job Management Guide. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 16
in Setup. For more information, see Appendix A. NOTE: If you specify incompatible print settings, the Conflict dialog box provides instructions to resolve the conflict. 6. From your application, click OK twice to send your print job. Make sure the Fiery X3e is selected as your current copier/printer. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 17
Mail Port Configuration dialog box. For more information on installing and configuring the Fiery Mail Port, see the User Software Installation Guide. TO SET DEFAULT PRINT OPTIONS FOR WINDOWS PRINT JOBS USING THE PCL OR POSTSCRIPT PRINTER DRIVER 1. Click Start. 2. For Windows 98/Me/NT 4.0/2000, choose - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 18
11-6 Printing from Windows Computers 4. Specify the default settings for your print job, as described on page 1-2. 5. Click OK to close the dialog box. Accessing print options without opening print option bars In the previous procedures, you accessed the Fiery X3e print options by opening the print - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 19
options such as Group Name and Notes, you must click and open the print option bars to access them. Using job templates You can save print option settings to your hard disk drive so you can easily load speci slightly, the following procedures are the same for both PCL and PostScript printer drivers. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 20
11-8 Printing from Windows Computers TO CREATE A JOB TEMPLATE 1. Make sure that Default Job Template appears in the Job Templates menu, and then configure options from the print option bars. As soon as you change any settings, the Job Templates menu displays Untitled instead of Default Job Template. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 21
templates you want to delete and click Delete. 3. Click Yes to confirm the deletion and click OK. TO MODIFY JOB TEMPLATES 1. From the Fiery Printing tab, click the Job Templates menu. 2. Choose the templates you want to modify and click OK. The options are automatically configured with the currently - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 22
11-10 Printing from Windows Computers TO EXPORT SAVED TEMPLATES 1. From the Fiery Printing tab, click the Job Templates button. 2. Choose the Job Templates you want to export and click Export. 3. file name does not have to match the Job Template name. 4. Click OK in the Job Template dialog box. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 23
TO IMPORT SAVED TEMPLATES 1. From the Fiery Printing tab, click the Job Templates button. 2. Click Import. 3. Browse to the location of the saved template file you want to import. 4. Select the file and click Open. 5. Click OK in the Job Templates dialog box. NOTE: When you import job templates - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 24
dialog box has a Print Option Shortcuts area. This section discusses how to change print options using this area and how to customize this area. NOTE: Although the user interface differs slightly, the following procedures are the same for both PCL and PostScript printer drivers. Print Option - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 25
option bar in which the selected print option is located opens, and the print option is highlighted. Alternatively, you can right-click the print option and click your selection from the menu that appears. 3. Click Apply to make the new settings the default or OK to close the Properties dialog box. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 26
dialog box appears. - 2. Select an option to remove from the Current Shortcuts list and click Remove. Or double-click an option to remove in the Current Shortcuts list. The maximum number of the print options that can be displayed is six. By default, six print options appear in the Print Option - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 27
NOTE: Custom page sizes are not supported with Imposition jobs. NOTE: Custom page sizes for Windows NT and Windows 2000/XP/Server 2003 cannot be set using the Fiery Printing tab. For more information, see "Working with custom page sizes in Windows NT 4.0 PostScript printer driver" on page 1-21 and - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 28
Settings and then Printers. For Windows XP, choose Printers and Faxes. For Windows Server 2003, choose Settings and then Printers and Faxes. 3. Right click the Fiery X3e PCL icon and choose Properties (Windows 98/Me), Document defaults (Windows NT), or Printing Preferences (Windows 2000/XP/Server - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 29
the length of the print job. Units-Select a unit of measurement for the print job. 7. Click OK to close the Enter Paper Size window. 8. Click OK to close the Fiery X3e printer driver. TO EDIT A CUSTOM PAGE SIZE WITH ALL WINDOWS PCL PRINTER DRIVERS. 1. Click Start. 2. For Windows 98/Me/NT 4.0/2000 - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 30
11-18 Printing from Windows Computers TO PRINT A CUSTOM PAGE SIZE WITH ALL WINDOWS PCL DRIVERS 1. Choose Print from your application. 2. Select the Fiery X3e PCL icon as the printer and click Properties. 3. Click the Fiery Printing tab, and then click the Paper Source print option bar. 4. From the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 31
paper name appears in the Document Size menu. Width-Enter the width of the print job. Length-Enter the length of the print job. Units-Select a unit of measurement for the print job. Transverse-Select this option to swap Width and Length dimensions to correspond to the paper feed direction of the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 32
dialog box appears. 6. Edit the settings, as described on page 1-19, and click OK. TO PRINT A CUSTOM PAGE SIZE WITH THE WINDOWS 98/ME POSTSCRIPT PRINTER DRIVER 1. Choose Print from your application. 2. Select the Fiery X3e PS icon as the printer and click Properties. 3. Click the Fiery Printing tab - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 33
within an application without redefining it each time you print. TO DEFINE A CUSTOM PAGE SIZE WITH THE WINDOWS NT 4.0 POSTSCRIPT PRINTER DRIVER 1. Click Start, choose Settings, and then choose Printers. 2. Right-click the Fiery X3e PS icon and choose Document defaults. 3. Click the Page Setup tab. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 34
Printing from Windows Computers 4. Choose PostScript Custom Page Size from the Paper Size menu. The PostScript Custom Page Size Definition dialog box appears. 5. Specify options to define the custom page size. Custom Page Size Dimensions-Enter the width and height of the print job. Unit-Select a unit - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 35
11-23 Defining and printing custom page sizes TO EDIT A CUSTOM PAGE SIZE WITH THE WINDOWS NT 4.0 POSTSCRIPT PRINTER DRIVER 1. Click Start, choose Settings, and then choose Printers. 2. Right-click the Fiery X3e PS icon and choose Document defaults. 3. Click the Advanced tab. 4. If PostScript Custom - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 36
11-24 Printing from Windows Computers TO PRINT A CUSTOM PAGE SIZE WITH THE WINDOWS NT 4.0 POSTSCRIPT PRINTER DRIVER 1. Choose Print from your application. 2. Select the Fiery X3e PS as the printer and click Properties. 3. Click the Fiery Printing tab, and click the Paper Source print option bar. 4. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 37
SERVER 2003 POSTSCRIPT PRINTER DRIVER 1. Click Start. 2. For Windows 2000, choose Settings and then Printers. For Windows XP, click Printers and Faxes. For Windows Server 2003, choose Settings and then Printers and Faxes. 3. Right-click the Fiery X3e PS icon and choose Printing Preferences. 4. Click - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 38
Printing from Windows Computers 6. Choose PostScript Custom Page Size from the Paper Size menu. The PostScript Custom Page Size Definition dialog box appears. 7. Specify options to define the custom page size. Custom Page Size Dimensions-Enter the width and height of the print job. Unit-Select a unit - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 39
box appears. If it does not appear, click Edit Custom Page Size. 7. Edit the settings, as described on page 1-26, and click OK. TO PRINT A CUSTOM PAGE SIZE WITH THE WINDOWS 2000/XP/SERVER 2003 POSTSCRIPT PRINTER DRIVER 1. Choose Print from your application. 2. Select the Fiery X3e as the printer - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 40
click OK again to print the job. Viewing the copier/printer's status The status of the copier/printer's consumables can be viewed from the PostScript driver's Printer Status tab. TO VIEW THE STATUS OF THE 31C-M'S CONSUMABLES 1. Choose Print in your application. 2. Select the Fiery X3e PS or PCL as - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 41
have a Fiery X3e onsite, and are preparing files to take to a service bureau or other location, print the final files to the File port (as opposed to one of the local ports). You can also print to the File port to create a file to download using Fiery Downloader. For instructions on printing to the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 42
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 43
printer driver and the correct printer description file, you can control many Fiery X3e printing features by specifying job settings from print dialog boxes. To achieve the best printing results from specific applications, see the Color Guide and the Fiery Color Reference. Selecting the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 44
who controls the flow of print jobs from Command WorkStation/Command WorkStation LE, you may be able to print only to the Hold queue. For more information on enabling print connections, see the Configuration Guide. 6. Close the Chooser window. The Fiery X3e remains selected as the current printer - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 45
on the current server default settings. TO SET PRINT OPTIONS AND PRINT WITH THE ADOBEPS PRINTER DRIVER 1. Open a file and choose Page Setup from the application's File menu. 2. Choose Page Attributes in the dialog box that appears. Select the Fiery X3e as your printer. NOTE: Page Setup dialog - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 46
22-4 Printing from Mac OS Computers 6. Select the Fiery X3e as your printer and specify settings for the print options displayed. NOTE: Print dialog boxes vary across applications. From the Paper Source menu, choose the paper tray for the job. For example, you can specify that the job be printed on - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 47
/Command WorkStation LE overrides, see the Job Management Guide. For information on entering the Starting Distribution Number, Account Number, or Password, see Appendix A. 8. Choose Printer Specific Options and specify the appropriate settings for your print job. Choose Printer Specific Options - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 48
set up the file properly for printing on the Fiery X3e and take longer to process. NOTE: If you specify incompatible print settings, a dialog box might appear. Follow the on-screen instructions to resolve the conflict. 9. To make the new settings the default settings, click Save Settings. 10. Click - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 49
application without redefining it each time you print. TO DEFINE A CUSTOM PAGE SIZE 1. Choose Page Setup from the application's File menu. 2. For Paper, choose Custom. 3. Choose Custom Page Default. Choose Custom Page Default Limits for selected dimension are displayed here Custom page names are - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 50
Choose Page Setup from the application's File menu. 2. Choose Custom Page Default. 3. Select the Custom Page Size name. 4. Edit the page dimensions and margins. 5. Click Add. 6. Replace the existing Custom Page name and click OK. TO PRINT A CUSTOM PAGE SIZE 1. Load one of the paper trays with custom - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 51
Once you install the Fiery X3e printer description files using the PPD Installer, you will be able to print directly from most Mac OS X applications. For more information about installing printer description files with the PPD Installer see, the User Software Installation Guide. To achieve the best - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 52
22-10 Printing from Mac OS Computers TO PRINT OPTIONS AND PRINT WITH THE POSTSCRIPT PRINTER DRIVER 1. Open a file and choose Page Setup from the application's File menu. 2. In the dialog box that appears, choose Page Attributes for Settings and the Fiery X3e for Format as your printer. 3. Select the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 53
22-11 Printing from applications with Mac OS X Native Mode computers 6. Select the Fiery X3e as your printer and choose an option category from the menu that appears. You can change the print option settings for each category. Choose print categories 7. Choose Printer Features and specify the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 54
the Fiery X3e and the copier/printer; you will have to choose specific Feature Set categories to see all the options. They override settings in Fiery X3e Printer Setup, but can be changed from Command WorkStation/Command WorkStation LE or Fiery Spooler. If you choose Printer's default, the job prints - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 55
fining custom page sizes With custom page sizes you can define page dimensions and margins. After you define a custom page size, you can use it from within an application without redefining it each time you print. TO DEFINE A CUSTOM PAGE SIZE 1. Choose Page Setup from the application's File menu - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 56
22-14 Printing from Mac OS Computers TO EDIT A SAVED CUSTOM PAGE SIZE 1. Choose Page Setup from the application's File menu. 2. For Settings, choose Custom Paper Size. 3. Select the Custom Page Size name. 4. Edit the page dimensions and margins. 5. Replace the existing Custom Page name by clicking - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 57
33-1 Printing to the Fiery X3e Chapter 3: Printing from UNIX Workstations You can print to the Fiery X3e directly from UNIX workstations. Jobs printed to the Fiery X3e are sent to the Print or Hold queues and can be manipulated from Command WorkStation, or from Windows and Mac OS computers on the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 58
On a system running SunOS 4.1.x or another BSD-based variant, use the lpq command to see printer jobs in the queue, as follows: lpq For example, if the Print queue of your Fiery X3e is named print_Server, type: lpq -Pprint_Server Your workstation displays the contents of the queue. • On - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 59
You can use the lpq command to check the job number. For example, to remove job number 123 from the Print queue of your Fiery X3e named print_Server, type: lprm -Pprint_Server 123 The lprm command reports the names of any files it removes. • On a system running Solaris 2.x or - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 60
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 61
figuring Fiery Downloader and WebDownloader on supported networking protocols, see the User Software Installation Guide. NOTE: The Windows and Mac OS version of Fiery Downloader and WebDownloader are fundamentally the same; differences are noted in this chapter. Where both windows or dialog boxes are - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 62
2. Select the Fiery X3e in the Chooser window and click OK (Windows) or Connect (Mac OS). The Fiery Downloader Status window appears, displaying the Fiery Downloader toolbar, menus, and status bar. Displays server status and user and document name of the job currently printing Displays server status - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 63
File menu or click the Open button. 5. Select the Fiery X3e in the dialog box that appears and click OK (Windows) or Connect (Mac OS). 6. To close the Fiery Downloader dialog box, choose Close from the File menu. 7. To quit Fiery Downloader, choose Exit (Windows) or Quit (Mac OS) from the File menu. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 64
Files and Fonts Downloading printer fonts You can download a variety of file types, as well as fonts, to the Fiery X3e. You can specify a limited number of print option settings for the files you download. TO DOWNLOAD A FILE OR FONT WITH FIERY DOWNLOADER 1. Use your application to generate a file - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 65
Files of type (Windows) or Show (Mac OS) menu. All Known Formats lists all files in formats supported by Fiery Downloader. You can download files and printing by the operator. NOTE: To download fonts, you must use the Direct connection (make sure the Direct connection is published on the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 66
All (Mac OS) to remove all files from the Files to Download list. 7. To change the attributes of a file to be downloaded, select it and click Options. PostScript Options dialog box (Windows) PDF Options dialog box (Windows) PostScript Options dialog box (Mac OS) PDF Options dialog box (Mac OS) - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 67
settings for an image. If the file you are printing includes transfer functions, the Fiery Downloader Brightness option has no effect. For more information on using transfer functions, see the documentation for your application. 'showpage' after EPS files (Windows) or 'showpage' (Mac OS) (PostScript - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 68
CREATE A FONT BACKUP 1. Start Fiery Downloader. 2. Choose Back up fonts from the File menu. This will back up all the user fonts on the Fiery X3e. 3. Browse to the location in which to save the fonts. You can create a new directory by clicking Create (Windows) or New Folder (Mac). 4. Click OK. The - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 69
from the saved location, and click OK (Windows) or Select this folder (Mac), This replaces all the user fonts on the Fiery X3e. TO DOWNLOAD FILES OR FONTS USING WEBDOWNLOADER 1. Create a PostScript, EPS, TIFF, or PDF file. Specify the appropriate print options, and include (embed) any necessary fonts - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 70
tab in the Adobe PS printer driver and set up the Font Substitution Table. For Windows NT 4.0/2000/XP/Server 2003, click the PostScript tab of the Fiery X3e Document Defaults dialog box and select TrueType Font Setting >Download as Softfont. Printer fonts and Mac OS screen fonts Like all PostScript - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 71
the Fiery X3e, as long as the printer fonts are installed in your System Folder. These fonts remain in the Fiery X3e only until your document has printed. If you print the same document again, your application must download the fonts again. If you regularly use one or more fonts from Windows or Mac - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 72
44-12 Downloading Files and Fonts TO VIEW FONT INFORMATION, UPDATE, PRINT, AND DELETE FONTS • Choose Font List the Configuration Guide or consult your administrator. The Font List dialog box includes Update, Print, and Delete buttons. The printer fonts included with the Fiery X3e (resident fonts) - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 73
-element documents-called FreeForm masters-on the Fiery X3e. You can send a variable-element job to the Fiery X3e with instructions to combine the job with a particular FreeForm master. NOTE: The FreeForm print options are not available in the PCL printer driver. The FreeForm 2 feature allows you to - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 74
mail merge feature, a page layout application that supports scripting, or a database application. FreeForm functions are controlled with two print options: Create Master and Use Master. You can set these options in the printer driver when you send a job, or instruct the operator to set them with job - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 75
finalized the design of the master document, print it to the Fiery X3e and specify that a FreeForm master be created from the job (see page 5-8). NOTE: Although the Fiery X3e can store up to 100 FreeForm masters, the printer driver interface and Fiery Spooler allow you to select numbers 1 through - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 76
in the appropriate places. For efficient variable data printing, create a variable document that has significantly more pages than its corresponding FreeForm master. Variable document When you have created a variable document, print it to the Fiery X3e and specify that it be combined with the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 77
document with the Use Master print option. The Fiery X3e combines the raster data of the variable document with the already RIPped FreeForm master, creating a new raster data file. The merged raster file can be soft-proofed (before it is printed) in the thumbnail windows of Command WorkStation/Command - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 78
55-6 Printing Variable Data Documents Pages 1 and 2 of the variable document are combined with pages 1 and 2, respectively, of the master document. The cycle of master pages then - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 79
assigned at your site. If FreeForm printing is used by a large number numbers 1 through 15 as print option settings. The operator can Use the Job Notes and Instructions fields to communicate instructions about your job to the Notes or Instructions fields. • For restrictions on print option settings - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 80
Mode Stapler Mode NOTE: The Top Binding print option of the Duplex setting has no effect when printing using FreeForm. TO PRINT VARIABLE DATA DOCUMENTS 1. Create a master document. The following example shows one page of a master document for a tri-fold brochure that was created with a page layout - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 81
variable document for the tri-fold brochure. The data in this document can be as simple as a name and address, or as complex as multiple, full-color graphics and photographic elements. 4. Print the variable document to the Fiery X3e with the Use Master print option set to the appropriate FreeForm - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 82
master you want to use. If you want to check the job before it prints, instruct the operator to RIP and Hold the job so you can preview it from Command WorkStation/Command WorkStation LE or Fiery Spooler. The following example shows the FreeForm master and variable document combined. The variable - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 83
third-party printing software. FreeForm 2 also provides the option to delete a specified FreeForm master from the Fiery X3e hard disk drive after its corresponding variable job has been successfully RIPped and printed. You can set this feature in a third-party application that supports the clearing - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 84
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 85
connection. For information on supported networking protocols, see the User Software Installation Guide. • Fiery Remote Scan must be installed as described in the User Software Installation Guide. • Photoshop RGB Setup should use EFIRGB ICC (Mac OS) or EFIRGB.icm (Windows) settings. For information - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 86
the copier glass or Automatic Document Feeder to the Fiery X3e, then open the image with WebScan or Fiery Remote Scan. You can then send the scan to a hard disk drive using a mailbox, an e-mail address, Internet fax, or FTP site. Scan from Scanner Mode in one of the following ways: manually scan - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 87
with Scanner Mode 2. Press the Scan key on the copier. The Select Destination screen appears in the Touch Panel. The Destination tab appears by default. 3. Press Direct. A screen appears that allows you to enter letters and symbols. 4. Press E-Mail or Internet, and enter the destination address - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 88
black and white. Monochrome-Scan using one specified color. File Format TIFF-Scan in TIFF file format. JPEG-Scan in JPEG file format. PDF-Scan in PDF file format. NOTE: The setting on the copier panel will have no effect if you choose a file format using Scan to Mailbox to retrieve a scanned image - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 89
66-5 Scanning from the copier with Scanner Mode Compression Level High Quality-Scan with high , Lighter or Darker-Select one of the Background Remove levels manually. -5 (Lighter) to +2 (Darker). This setting substantially removes pale color on the original scanned document. If you do not want to - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 90
are limited using the copier. The following settings are fixed and cannot be changed: Color Mode-Monochrome Resolution-200 Image Width and Length. As a result, you will receive a smaller size than the actual scanned size. For example, if you choose the A3 scan size, it will be reduced and printed - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 91
66-7 Scanning from the copier with Scanner Mode One-Touch scanning If you program directory names in advance with the Fiery X3e home page, you can access them with One-Touch. You can pre-program 115 One-Touch keys and 6 Temporary Registration keys through the Fiery X3e home page. For more - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 92
66-8 Scanning The Destination tab appears by default. NOTE: If the Destination tab does not appear, press key or a One-Touch key. For more information about these keys, see the Fiery X3e home page documentation for your copier. NOTE: You can see the Send Mode destination in the upper-right corner of - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 93
menu, and click Fiery Remote Scan 5. 3. Select the Fiery X3e in the Choose Device dialog box and click OK. If the Fiery X3e does not appear in the Configuration list, you must configure the list to communicate with the Fiery X3e. For instructions, see the User Software Installation Guide. 4. If you - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 94
66-10 Scanning 5. Click the Initiate tab. Fiery Remote Scan application Fiery Remote Scan TWAIN plug-in - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 95
If you are using the Fiery Remote Scan application, start the Fiery Remote Scan application. 2. If you are using the Fiery Remote Scan TWAIN plug in, start Photoshop, choose Import from the File menu, and click Fiery Remote Scan. 3. Select the Fiery X3e in the Choose Device dialog box and click OK. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 96
66-12 Scanning 4. Click the Retrieve tab. Fiery Remote Scan application Fiery Remote Scan TWAIN plug-in - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 97
Fiery Remote Scan 5. Click Change Mailbox. 6. Enter the appropriate Mailbox and password, and click OK. NOTE: To access your mailbox, you must enable mailboxes in Setup. For more information, see the Configuration Guide. 7. Click Refresh. All scanned images Fiery X3e, select the job and click Delete. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 98
, or Internet FAX. TO SEND A SCAN JOB TO A DESTINATION 1. After selecting the scan file to send, click Send at the bottom of the Send dialog box. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 99
Scan 2. To send the job to the Hold queue, select Fiery Hold Queue. 3. To send the scan job to a hard disk drive, see "To select a hard disk drive as a destination" on page 6-15. 4. To send the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 100
scan file is automatically sent as a URL. 1. Select Email and click Edit Email. The Email message window appears. 2. Enter an e-mail address in the To: format file, use an application that supports this format. Scan jobs with multiple pages are not supported on some applications using TIFF 6.0. For - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 101
Proxy Enable and enter the information for the proxy server. NOTE: The default port number is 21. The Proxy Server Port Number configured at Setup must be the same number. For more information, see the Configuration Guide. 3. Choose a File Format. NOTE: Scanned TIFF files are in TIFF 6.0 format. NOTE - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 102
to be able to select Internet FAX in the Send dialog box. The Internet FAX message dialog box appears. This serves as the cover page for your scan file. 2. Enter an email address in the To: field, or browse the list of email addresses in the Address Book by clicking To:, Cc:, or Bcc - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 103
Mailbox name in the Mailbox field. NOTE: The Mailbox name is the directory you specified with the copier's Scanner Mode. The password is not needed if the mailbox password is not enabled on the Fiery. If the password is enabled, the Mailbox name and password are specified on the Fiery X3e home page. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 104
66-20 Scanning 3. Click Refresh. 4. Enter the Mailbox Password and click OK. All scanned documents in the Mailbox are displayed. WebScan lists the following information about each scanned job: File name, Date, Pages, File - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 105
scanned image is displayed in your web browser. NOTE: You must have Adobe Acrobat installed to view a scanned PDF. 8. To print the job, choose Print from the File menu. To delete a scanned image from the Fiery X3e hard disk drive, select the file that you want to delete from the WebScan window and - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 106
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 107
to store and reuse frequently used print options when printing PostScript and PDF files on the Fiery X3e. NOTE: Hot Folders is available as print a job by printing the document file from the source application, with the appropriate Hot Folder specified as the print destination. The Hot Folder Control - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 108
Hot Folder. File format PostScript PDF Print option override Fully supported Partially supported Imposition Fully supported (with PS-to-PDF conversion) Fully supported The Fiery X3e offers full support for PostScript and PDF jobs if you assign only printer default options to a Hot Folder. For - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 109
Hot Folder application for the monitoring to occur. To display the Hot Folder Control Panel, start the Hot Folder application. The Hot Folder Control Panel allows you to create and manage all your folders. You can also use the Control Panel to monitor the status of jobs sent to your folders. The Hot - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 110
, or by opening the Windows system Control Panel and double-clicking the icon for EFI Hot Folders. Creating and deleting Hot Folders Each Hot Folder you create resides on your hard disk drive and contains all the files and subfolders corresponding to information about your jobs. You can print jobs by - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 111
installed and running locally on the file server). 4. In the Server field, click Select. The Select Server dialog box appears. 5. To configure the connection to the Fiery X3e server in a local subnet, click the AutoSearch tab. Only servers that support Hot Folders appear in the Available Servers area. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 112
it and click OK. To manually configure the connection to the Fiery X3e, click the Manual tab and enter the IP address or DNS name of the Fiery X3e and click OK. 6. In the Logical Printer field, choose the print queue for the Hot Folder. 7. In the Properties dialog box, specify properties and settings - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 113
disabled, click Disable. You must disable a folder before you can remove it. 3. Click Remove. The folder is removed from the Control Panel. 4. Click OK to close the Hot Folder Control Panel. 5. Locate the Hot Folder on your computer, and make sure the folder does not contain any archived jobs you - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 114
a green state in the Control Panel; disabled folders are marked with a red state. Setting Hot Folder preferences You can specify several preference settings for the Hot Folder application, including the unit of measurement used for imposition settings, and the default folder location for temporary - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 115
FOLDER APPLICATION ON YOUR COMPUTER 1. Click Preferences in the Hot Folders Control Panel. The Preferences dialog box appears. 2. To specify the default unit of measurement, choose an option from the Units menu. The default unit of measurement is used for several imposition settings. 3. To specify - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 116
Folder. You can specify the print options, imposition settings, server destination, and queue destination each Hot Folder uses for incoming jobs. Use any of the following methods to display the Folder properties dialog box: • Create a new folder using the Hot Folder Control Panel (see page 7-4); the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 117
Problems at the print device might cause a job to fail. Move Folder-the default location for storing archive copies of all jobs that have been successfully processed; also referred to as the Keep Original Folder in the Folder Settings dialog box processing a print job. You can instruct the Hot - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 118
are assigned to all jobs sent through that Hot Folder. These print options override any default options that may be associated with the destination printer group. When setting options for a folder assigned to a print job, all options for every print device in the group appear, and some might conflict - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 119
77-13 Assigning properties to Hot Folders TO SET PRINT OPTIONS FOR A HOT FOLDER 1. To enable print settings, select Job Settings in the Properties dialog box. If necessary, click Define to display the Job Settings dialog box. Print options are organized into functional groups. You can expand each - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 120
and enabled on the Fiery X3e, you can configure the Hot Folder application to apply prebuilt imposition templates to print jobs. If the settings about using DocBuilder Pro, see the Job Management Guide. NOTE: The Direct connection is not supported when setting imposition options for a folder. NOTE: - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 121
default imposition templates. The destination server applies the template imposition settings to your document prior to printing Printer's Marks Horizontal Bleed and Vertical Bleed Finishing Binding Gang-up Result Adjusts imageable reproducing the image on each sheet for gang-up printing. Adds - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 122
for the folder from which the job is printing. For detailed information on imposition settings, see the Job Management Guide. Viewing Hot Folder Job Logs You can Hot Folder Control Panel, select the folder for which you want to view the Job Log. 2. Click View Log. The Folder Log dialog box appears. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 123
Hot Folder Job Logs The Folder Log dialog box displays the following information: Time-Indicates the time the job was processed through the Hot Folder. Source-Lists the file name of the printed job. Server-Displays the name of the server receiving the print job. Status-Indicates whether or not the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 124
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 125
Command WorkStation/Command WorkStation LE and Fiery Spooler provide the capability to view and control the flow of print jobs to the Fiery X3e. If the administrator has set Administrator and Operator passwords in Setup, you must have one of these passwords to perform most Command WorkStation/Command - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 126
your Internet browser. For information about supported platforms and browsers, see the User Software Installation Guide. 2. Type the IP address or the DNS name of the Fiery X3e. For this information, contact the operator or administrator. 3. If a Log In dialog box appears, select Guest and click OK - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 127
WebTool You can use Status to see what jobs are currently processing and printing. To access Status, open the Fiery X3e home page and click Status. The current RIP Status and Printer Status appear in the window. NOTE: For best results, use WebTools at the recommended resolution. For more information - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 128
X3e and alerts you to any errors that interfere with printing. If you have more than one Fiery X3e, you can use Job Monitor to monitor all of them at the same time. To access Job Monitor, you must install the Windows printer driver for Fiery X3e, as described in the User Software Installation Guide - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 129
Job Monitor shortcut on the desktop to start the utility. Job Monitor opens a utility window on the screen and establishes a connection to the Fiery X3e. If you have installed and configured printer drivers for more than one Fiery X3e, Job Monitor automatically establishes connections to all. After - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 130
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 131
the E-mail Port Monitor set up, your print job is e-mailed to the Fiery X3e when you choose Print from an application. For more information about setting up the E-mail Port Monitor, see the User Software Installation Guide.Fiery E-mail Service also supports Scan to E-mail and Scan to Internet FAX - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 132
. When you send an e-mail with an attachment, Fiery E-mail Service extracts the file and sends it to the Fiery X3e Print queue. The file format must be one supported by the Fiery X3e. By default, anyone can print with an E-mail Client, unless the Print address book has been set up by the Administrator - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 133
Fiery X3e receives the job, you receive an e-mail notification that the print job was accepted. The e-mail notification also provides a job identification (ID), which allows you to manage jobs with Job Control (see the following section). The e-mail notification indicates any current error at the copier - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 134
a Job Control command. Printing using the E-mail Port Monitor Once you set up the E-mail Port Monitor, you can print using Fiery E-mail Service in the same manner as any other printing method. No additional steps are necessary. NOTE: The E-mail Port Monitor is only supported on Windows. NOTE: The - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 135
up the E-mail Port Monitor for the Fiery X3e. 3. Click Properties. 4. Click the Fiery Printing tab. 5. Set the print options and click OK. Your job is sent to the Fiery X3e. To set options using the printer driver, see "Setting options and printing from Windows computers" on page 1-1. NOTE: If the - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 136
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 137
) files. Windows computers can also communicate with the Fiery X3e by means of a Printer Control Language (PCL) printer driver and PDD files (the PCL equivalent of PPD files). Both drivers enable you to use special features of the Fiery X3e from the Print dialog box. A printer driver manages printing - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 138
specified when printing jobs with Fiery Downloader. To change options in Fiery Downloader, select a job in the Files to be Downloaded (Windows) or Files to Download (Mac OS) list and click Options. For more information, see Chapter 4. • From ColorWise Pro Tools You can set the default CMYK Simulation - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 139
settings column indicate default printer driver settings (PPD defaults). If you do not use the printer driver interface to configure a particular option, the Fiery X3e prints the job with the underlined setting. For options that can be configured in Setup from the Control Panel, Command WorkStation - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 140
white gaps and reduces halo effects or misregistration of colors. This option is only available with the PostScript driver. The Printer's default setting reflects the setting specified in Fiery X3e Setup. For Windows, choose Expert Color as the Color Mode to access this option. If this option is - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 141
fied in Fiery X3e Setup. For Windows 98/Me and Windows NT 4.0, choose Expert Color as the Color Mode to access this option. For more information, see the Color Guide. This option is not supported for PCL. Color Mode Printer's default/CMYK/Grayscale (from the Mac OS driver) Or Print Mode Standard - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 142
black-and-white pages, each representing one color plate. For more information, see the Color Guide. Specify the number of copies of the job Do not enter a value greater than 999. to print. Select Off to send the image data as a normal print job. Select Memory to store the print job to the copier - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 143
Groups is enabled, the Fiery X3e Administrator has assigned users to print groups, and passwords to each group. Enter the appropriate Group Password for the print job. This feature is not supported with Mac OS X Native Mode computers. Specify if you want to punch holes for your job. The Folding - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 144
if you want to print with transparency Interleaving. The Notes field has a 32-character limit. This feature is not supported with Mac OS X Native Color Guide. This option is not supported for PCL. Specify a source phosphors value for printing RGB images, objects, and text. The Printer's default - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 145
5000K setting. For more information, see the Color Guide. This option is not supported for PCL. Optimize PowerPoint Printer's default/Off/On Select On when printing PowerPoint files The Printer's default setting produces the to the Fiery X3e. same result as the Off setting. Orientation Portrait - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 146
(CRD) to use when you print RGB images, objects, and text. The Printer's default setting reflects the setting specified in Fiery X3e Setup. For Windows, choose Expert Color as the Color Mode to access this option. For more information, see the Color Guide. This option is not supported for PCL. - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 147
space definition for printing RGB images, objects, and text. The Printer's default setting reflects the setting specified in Fiery X3e Setup. For Windows, choose Expert Color as the Color Mode to access this option. For more information, see the Color Guide. This option is not supported for PCL. Save - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 148
print blend to the same color from the PANTONE library. The Printer's default setting reflects the setting specified in Fiery X3e Setup. For Windows, choose Expert Color as the Color Mode to access this option. For more information, see the Color Guide. This option is not supported in the copier must - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 149
paper media type. TO PRINT DUPLEX PAGES 1. Choose Print in your application and locate the Duplex print option. The location of Fiery X3e print options varies, depending on the printer driver you are using. 2. Choose one of the Duplex settings: Left Binding-Prints the top of the image on Side 1, on - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 150
the current tray becomes empty, while continuing to print. Mixed Media With the Mixed Media feature, you can print ranges of pages on different media. You specify the Mixed Media print option when you print the job with the Fiery X3e printer driver for Windows. For example, you can use this option - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 151
AA-15 Print Options TO PRINT USING MIXED MEDIA ON WINDOWS COMPUTERS 1. Choose Print in your application and click Properties. 2. Click the Fiery Printing tab. 3. Click the Paper Source print option bar, and then click Define. The Mixed Media dialog box appears. Selection List 4. For each page range, - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 152
mixed media options. TO MODIFY MIXED MEDIA SETTINGS 1. Choose Print in your application and click Properties. 2. Click the Fiery Printing tab. 3. Click the Paper Source print option bar, and then click Define. The Mixed Media dialog box appears. 4. Select the item you want to modify in the Selection - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 153
TO DELETE MIXED MEDIA SETTINGS 1. Choose Print in your application and click Properties. 2. Click the Fiery Printing tab. 3. Click the Paper Source print option bar, and then click Define. The Mixed Media dialog box appears. 4. Select the item you want to delete in the Selection List. 5. Click - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 154
copier and not printed until you retrieve it with the correct password. You can specify a lock job from the Fiery X3e PostScript or PCL printer driver. TO SPECIFY A LOCK JOB ON A WINDOWS COMPUTER 1. Choose Print from the application's File menu. 2. The Print dialog box appears. 3. Select the Fiery - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 155
AT THE COPIER 1. Select Copy mode from the copier panel. 2. Select Job Control at the top of the display. 3. Select Unlock Job at the bottom of the display. A list of locked jobs appears. 4. Select the locked job that you want to print. 5. Enter the 4-digit password. The copier will print the job - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 156
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 157
font substitution in PDF files. NOTE: For Mac OS computers, install the corresponding screen fonts from the User Software CD. For instructions, see the User Software Installation Guide. Adobe Type 1 fonts The Fiery X3e includes 126 Adobe Type 1 fonts: • The Mac OS column lists the name as it appears - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 158
List PostScript name Mac OS menu name ArialMT Eurostile Bold Eurostile-ExtendedTwo Eurostile ExtendedTwo Windows menu name, style Arial AvantGarde AvantGarde Clarendon Light Clarendon Clarendon, Bold Cooper Black Cooper Black, Italic Copperplate33bc Copperplate32bc Coronet Courier Courier, - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 159
Helvetica-CondensedOblique Helvetica-CondensedBoldObl HoeflerText-Ornaments Mac OS menu name Eurostile BoldExtendedTwo GillSans GillSans Narrow Helvetica Narrow Bold Helvetica Narrow Oblique Helvetica Narrow BoldObl Windows menu name, style Eurostile ExtendedTwo, Bold GillSans GillSans, Bold - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 160
BB-4 Font List PostScript name Mac OS menu name Windows menu name, style JoannaMT JoannaMT-Bold JoannaMT-Italic Joanna MT Joanna MT Bd Joanna MT It Joanna MT Joanna MT, Bold Joanna MT, Italic JoannaMT- - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 161
BB-5 Font List PostScript name Mac OS menu name Windows menu name, style StempelGaramond-Italic StempelGaramond-BoldItalic Symbol StempelGaramond Italic StempelGaramond BoldItalic Symbol StempelGaramond Roman, Italic StempelGaramond Roman, Bold Italic Symbol Tekton Times-Roman Times- - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 162
Zapf Chancery Zapf Dingbats TrueType fonts The Fiery X3e includes 10 TrueType fonts: PostScript name Apple-Chancery Chicago Geneva HoeflerText-Black HoeflerText-BlackItalic HoeflerText-Italic HoeflerText-Regular Monaco New York Wingdings-Regular Mac OS menu name Apple Chancery Chicago Geneva - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 163
Bookman Demi Italic, ITC Zapf Chancery Medium Italic, ITC Zapf Dingbats • Letter Gothic, Letter Gothic Bold, Letter Gothic Italic • Line Printer (a bitmap font) • Marigold • New Century Schoolbook Roman, New Century Schoolbook Bold, New Century Schoolbook Italic, New Century Schoolbook Bold Italic - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 164
- Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 165
CC-1 Troubleshooting Appendix C: Troubleshooting This appendix provides troubleshooting tips. Maintaining optimal system performance The Fiery X3e does not require maintenance. Beyond the routine requirements of servicing and maintaining the copier/printer and replenishing consumables, you can - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 166
User Software CD. Applications other than the Fiery X3e utilities are not supported and can cause system problems. General printing problems If this happens You cannot connect to the Fiery X3e. You cannot select or view one of the queues. You cannot connect to the Fiery X3e from a Windows computer - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 167
the Functions menu on the Control Panel or clicks the function key on Command WorkStation/Command WorkStation LE. • Make sure the Fiery X3e is selected as the current copier/printer. Before printing, you must select the Fiery X3e as the current printer from your Windows computer, Mac OS computer, or - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 168
sure the Fiery X3e PPD is installed correctly. For information about installing this file, see the User Software Installation Guide. • Make sure the system has been calibrated. For instructions, see the Color Guide. • Ask the operator to print a Test Page with the copier/printer. The problem may be - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 169
X3e to new system software, delete the previous version of Fiery Downloader from your Windows or Mac OS computer and install the latest version to ensure full compatibility. • Make sure the connection is configured correctly. For instructions, see the User Software Installation Guide. • Try printing - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 170
CC-6 Troubleshooting Problems with Fiery Remote Scan If this happens: Fiery Remote Scan main window does not appear after launching. Try this • Check to see if the TWAIN module(s) installed by Adobe Photoshop are located in the correct folder. If not, reinstall Adobe Photoshop software. Problems - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 171
defining for Windows Server 2003 1-24 printing with Windows 2000/XP 1-27 printing with Windows 98/Me 1-20 printing with Windows NT 4.0 1-24 printing with Windows Server 2003 1-27 Custom Paper Sizes defining for Mac OS 2-7 D DCS (Desktop Color Separations) C-4 Direct connection downloading fonts 4-10 - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 172
page 8-2 overview 8-4 problems with C-6 WebLink 8-4 Fiery E-mail Service about 9-1 Job Control 9-4 managing print jobs 9-4 printing using an E-mail client 9-2 printing using the E-mail Port Monitor 9-4 File name entry field 4-6 File port, saving files to 1-29 Files of type menu (Windows) 4-5 font list - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 173
downloading files 4-1 font list B-1 to B-6 Hot Folder support for 7-2 PostScript printer description files, see PPDs PostScript printer drivers explained A-1 Mac OS 2-1 Windows 1-1 PPDs (PostScript printer description files) options A-2 setting print options with Mac OS 2-1 Print command (Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Printing Guide for KM-C2230 - Page 174
A-13 tray selection Mac OS 2-4, 2-8 Windows 1-18 trays, printer A-14 troubleshooting EPS files C-5 Fiery Downloader C-5 Fiery Scan C-6 Fiery WebTools C-6 general printing problems C-2 to C-3 print quality C-4 TrueType fonts B-6 U UNIX BSD (Berkeley Software Distribution) variant of 3-3 displaying
Fiery X3e 31C-M Color Server
PRINTING GUIDE