Kyocera KM-C3225E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 80
Exposure Level, Original Image Quality, EcoPrint, Color Balance Adjust
View all Kyocera KM-C3225E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Copy Functions NOTE: Incorrect copying may occur if the original is not placed correctly. 3 Press [Close]. Exposure Level Set the copy exposure. The setting items are as follows. Item Auto Manual Description Automatically adjusts copy contrast. Manually adjust the copy contrast. 1 Press [Quality] and on the next screen press [Exposure Mode]. Ready to Job build. Place originals then press Start key. Job Build - Step ( Full-Color ) Density 4 Exposure Mode Off Color balance Basic Text + Photo Orig.Image Quality Off Adjust Hue Quality Off EcoPrint Off Sharp -ness Edit 1 sided copy-Left Finished page #: 2 Select [Auto] or [Manual]. If [Manual] is selected, press [Lighter] or [Darker] to adjust the contrast. 3 Press [Close]. Original Image Quality Specify the Image Quality based on the original type. 1 Press [Quality] and on the next screen, press [Orig. Image Quality] ([Image Quality]). 2 Select the image quality. For further details on image quality, refer to Setting Image Quality in Chapter 3 of Operation Guide. 3 Press [Close]. EcoPrint Set EcoPrint to save toner consumption. 1 Press [Quality] and on the next screen press [EcoPrint]. NOTE: EcoPrint is a common setting to all steps. It may only be configured as the first step. 2 Press [On]. EcoPrint is enabled. 3 Press [Close]. Color Balance Adjust Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments. 1 Press [Quality] and on the next screen press [Color balance] ([Colour balance]). 1-64