Kyocera KM-C3232 C2520/C3225/C3232 Operation Guide (Advanced Edition) - Page 213

Included Scanner Utilities Basic - Color/Monochrome (Gray) mode The setting items are as follows. Setting Item Value Description File Type JPEG, TIFF†, PDF, PDF (High Complex)†† Specify the file type when saving a scanned image. JPEG quality 1 (Low), 2, 3 (Standard), 4, 5 (High) Set the JPEG quality. High Compression 1 (Low size), 2 (normal), 3 (High PDF quality quality) Sets high compression PDF quality. Output Color Type RGB, sRGB Configure the color output type. Density -3 - +3 Adjustment (Auto) When density adjustment is set to Auto, adjusts the overall dark/light balance. Density Adjustment (Manual) -3 - +3 When density adjustment is set to Manual, adjusts the overall dark/light balance. † Because the device dues not provide TIFF file format support for full color or grayscale, conversion to the PDF file format is automatically performed. †† If the PDF upgrade kit is not installed, even if you set PDF, conversion to the PDF (High Complex) file format is automatically performed. Basic - Universal mode The setting items are as follows. Setting Item Value Description Resolution 600dpi, 400dpi, 300dpi, 200dpi Select from the following four resolutions to scan an original. Multiple Scanning OFF, ON Select whether to scan originals in a continuous operation. File Name Enter the filename using less than 16 Specify the name used when saving characters. scanned images. Extension The setting items are as follows. Setting Item Full scan Centering Value - ON, OFF Uncompress - scanning Description Does not function on this scanner. When scanning with zoom, by specifying the Original size and the Send size, blank borders around the bottom or left and right will be shown depending on the sizes. When setting Auto Center, the image is moved to the center so that blank borders around the top and bottom or left and right become even. Does not function on this scanner. 6-21