Kyocera KM-C3232E DF-730 Operation Guide Rev-2 - Page 11
Handling a staple jam, the tab B with your finger.
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
6. Reinstall the staple holder in its original location inside the staple unit. The staple holder will click into place when it is properly inserted. 7. Close the stapler cover. (B) Handling a staple jam If a paper jam happens to occur during stapling, a staple may have jammed. In this case, perform the following procedure. 1. Remove the staple holder using the same procedure as in "Replenishing staples". Then, open the face plate by pushing on the tab (B) with your finger. 2. Remove any jammed staples from the front of the staple holder (where the staples are set). 3. Push the face plate closed into its original position. 4. Reinstall the staple holder in its original location inside the staple unit. The staple holder will click into place when it is properly inserted. 5. Close the stapler cover. 9