LG 32PC5DVC Owners Manual - Page 73

24. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [j ][u][] [Set ID][] [Data] [Cr] Data 01 : To set Acknowledgement [u][] [Set ID][] [OK/NG] [Data] [x] 2.5. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m] [b] [] [Set ID] [] [Data] [Cr] Data O0: Channel Delete Data 01 : Channel Add Acknowledgement [b][] [Set ID] [ ] [OK/NG] [Data] [x] 26. Key (Command: m c) To send IR remote key code. Transmission [m] [c][ ] [Set ID][ ] [Data] [Cr] Acknowledgement [c] [] [Set ID] [ ] [OK/NG] [Data] [x] OF TV 0B INPUT 08 POWER 0E TIMER 39 CC 40 • 41 • 07 _l 10-19 Number Key 0-9 06 • -O 4C - (Dash) -O CB ADJUST Z 09 MUTE X 02 VOL + 44 ENTER 43 MENU 52 SOUND 4D PICTURE 03 VOL - 5B EXIT 00 CH + 0A SAP 01 CH - 1A BACK 1E FAV 27. Channel Tuning (Command: m a) To tune channel to following physical/major/minor number. Transmission [m] [a][] [Set ID][] [DataO0] [ ] [Data01] [] [Data02] [ ] [Data03] [ ] [Data04] [ ] [Data05] [Cr] Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02-45, NTSC cable: 01,0E-7D ATSC air: 01-45, ATSC cable: 01-87 Data 01 & 02: Major Channel Number Data 01 : High byte Data 02: Low byte Two bytes are available for the Major and Minor, normally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. 72