LG 37BH7N-H Owners Manual - Page 118

Remote Control Key Lock Command: t p, Local Key Operation Lock] Command: t o

Get LG 37BH7N-H PDF manuals and user guides View all LG 37BH7N-H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

ENGLISH 102 44. Remote Control Key Lock (Command: t p) Configures the settings of the product's remote control key. Transmission (t)(p)( )(Set ID)( )(Data)(Cr) Data 00: Unlocks all keys 01: Locks all keys except Power key 02: Locks all keys Acknowledgment (p)( )(Set ID)( )(OK/NG)(Data)(x) * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. 45. [Local Key Operation Lock] (Command: t o) Configures the local key operation settings of the product. Transmission (t)(o)( )(Set ID)( )(Data)(Cr) Data 00: Unlocks all keys 01: Locks all keys except Power key 02: Locks all keys Acknowledgment (o)( )(Set ID)( )(OK/NG)(Data)(x) * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. * This feature may not be available for all models. 46. Status Check (Command: s v) Checks the current signal of the product. Transmission (s)(v)( )(Set ID)( )(Data)( )(FF)(Cr) Data 02: Check whether there is a signal 03: The monitor is currently in PM Mode 07: Checks whether the Top, Bottom and Main temperature sensors are functioning normally. 09: Fan Speed 10: RGB Sensing OK/NG (screen fault detection) 16: Check the humidity value 17: Check the value of the intensity of illumination 18: Check the status value of the slope of the product Acknowledgment (v)( )(Set ID)( )(OK/NG)(Data)(Data1)(x) Data 02 (when a signal is found) Data1 00: No signal 01: Signal present Data 03 (when the monitor is currently in PM mode) Data1 00: Screen is on 01: Screen is off 02: Screen Off Always is activated 03: Sustain Aspect Ratio is activated 04: Screen Off & Backlight On is activated Data 07 (when checking whether the Top, Bottom and Main temperature sensors are working properly) Data1 00: All temperature sensors are faulty 01: Top normal, Bottom faulty, Main faulty 02: Top faulty, Bottom normal, Main faulty 03: Top normal, Bottom normal, Main faulty 04: Top faulty, Bottom faulty, Main normal 05: Top normal, Bottom faulty, Main normal 06: Top faulty, Bottom normal, Main normal 07: All temperature sensors are normal Data 10(when executing Screen Fault Detection) Data 1 00: Screen Fault Detection result NG 07: Screen Fault Detection result OK * When screen Fault Detection is set to Off or not supported, execution results are rendered "NG." Data 16(for checking the humidity value) Data 1 0~100: Reads the %RH value of the current humidity (indicated as a Hex value). Data 17(for checking the value of the intensity of illumination) Data 1 1~1000: Reads the Lux value of the current intensity of illumination (indicated as a Hex value). Data 18(for checking the status value of the slope of the product) Data 1 00: 0 degrees 01: 90 degrees 02: 180 degrees 03: 270 degrees 04: Fallen forward 05: Fallen backward

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
102
ENGLISH
44. Remote Control Key Lock (Command: t p)
Configures the settings of the product’s remote control key.
Transmission
(t)(p)( )(Set ID)( )(Data)(Cr)
Data
00: Unlocks all keys
01: Locks all keys except Power key
02: Locks all keys
Acknowledgment
(p)( )(Set ID)( )(OK/NG)(Data)(x)
* When the monitor is turned off, the power key works even in
the locks on all of the keys (02) mode.
45. [Local Key Operation Lock] (Command: t o)
Configures the local key operation settings of the product.
Transmission
(t)(o)( )(Set ID)( )(Data)(Cr)
Data
00: Unlocks all keys
01: Locks all keys except Power key
02: Locks all keys
Acknowledgment
(o)( )(Set ID)( )(OK/NG)(Data)(x)
* When the monitor is turned off, the power key works even in
the locks on all of the keys (02) mode.
* This feature may not be available for all models.
46. Status Check (Command: s v)
Checks the current signal of the product.
Transmission
(s)(v)( )(Set ID)( )(Data)( )(FF)(Cr)
Data
02: Check whether there is a signal
03: The monitor is currently in PM Mode
07: Checks whether the Top, Bottom and Main
temperature sensors are functioning normally.
09: Fan Speed
10: RGB Sensing OK/NG (screen fault detection)
16: Check the humidity value
17: Check the value of the intensity of illumination
18: Check the status value of the slope of the
product
Acknowledgment
(v)( )(Set ID)( )(OK/NG)(Data)(Data1)(x)
Data
02 (when a signal is found)
Data1 00: No signal
01: Signal present
Data
03 (when the monitor is currently in PM mode)
Data1
00: Screen is on
01: Screen is off
02: Screen Off Always is activated
03: Sustain Aspect Ratio is activated
04: Screen Off & Backlight On is activated
Data
07 (when checking whether the Top, Bottom
and Main temperature sensors are working
properly)
Data1
00: All temperature sensors are faulty
01: Top normal, Bottom faulty, Main faulty
02: Top faulty, Bottom normal, Main faulty
03: Top normal, Bottom normal, Main faulty
04: Top faulty, Bottom faulty, Main normal
05: Top normal, Bottom faulty, Main normal
06: Top faulty, Bottom normal, Main normal
07: All temperature sensors are normal
Data
10(when executing Screen Fault Detection)
Data 1 00: Screen Fault Detection result NG
07: Screen Fault Detection result OK
* When screen Fault Detection is set to Off or not supported,
execution results are rendered “NG.”
Data
16 (for checking the humidity value)
Data 1 0~100: Reads the %RH value of the current
humidity (indicated as a Hex value).
Data
17 (for checking the value of the intensity of
illumination)
Data 1 1~1000: Reads the Lux value of the current
intensity of illumination (indicated as a Hex value).
Data
18 (for checking the status value of the slope of
the product)
Data 1 00: 0 degrees
01: 90 degrees
02: 180 degrees
03: 270 degrees
04: Fallen forward
05: Fallen backward