LG 42PM3MV Owners Manual - Page 38
Main Picture Input
UPC - 719192169555
View all LG 42PM3MV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
External Control Device Setup 23. ISM Method (Command 1 : j, Command 2 : p) G To control the ISM method. You can also adjust ISM Method in SPECIAL menu. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 8 : Normal Mode 4 : White Wash Ack 2 : Orbiter 1 : Inversion [p][ ][Set ID][ ][OK][Data][x] 24. Low Power (Command 1 : j, Command 2 : q) G To reduce the power consumption of the monitor. You can also adjust Low Power in SPECIAL menu. Transmission [j][q][ ][Set ID][ ][Data][ ][Cr] Data 0 : Off 1 : On Ack [q][ ][Set ID][ ][OK][Data][x] 25. Orbiter Time Setting (Command 1 : j, Command 2 : r) G To adjust orbiter operation time term. Transmission [j][r][ ][Set ID][ ][Data][ ][Cr] Data Min: 1 ~ Max: FE * Refer to 'Real data mapping 1'. See page 35. Ack [r][ ][Set ID][ ][OK][Data][x] 26. Orbiter Pixel Setting (Command 1 : j, Command 2 : s) G To adjust pixel number in orbiter function. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: 3 * Refer to 'Real data mapping 1'. See page 35. Ack [s][ ][Set ID][ ][OK][Data][x] 38 Plasma Monitor 27. Auto Configure (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Ack [u][ ][Set ID][ ][OK][Data][x] 28. Key (Command 1 : m, Command 2 : c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 40. Ack [c][ ][Set ID][ ][OK][Data][x] 29. Input select (Command 1 : x, Command 2 : b) (Main Picture Input) G To select input source for monitor. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB LSB 0000 000 0 External Input Input Number External Input 0010 0100 0101 0110 1001 Data Video Component RGB-DTV RGB-PC HDMI Input Number 0000 0001 Ack [b][ ][Set ID][ ][OK][Data][x] Data Input1 Input2 If you use either RGB-DTV or RGB-PC command, It is possible to select RGB input. * If you read status of the input mode in RGB input , Monitor will always send the DTV mode status.