LG 42PX5D Owners Manual - Page 15
Digitat, provided - remote
UPC - 719192168558
View all LG 42PX5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3. Anamog and Digitat TV signals provided on cable and antenna f Antenna Bronze Wire Installation Cable TV Wall Jack Turn clockwise to tighten. RF Coaxial Wire (75 ohm) Bronze Wire _J • To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. • If the antenna needs to be split for two TV's, install a "2Way Signal Splitter" in the connections. If the antenna is not installed properly, contact your dealer for assistance. - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from the VCR's output iacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the iack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect an S-VIDEO output from VCR to the S-VDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. 2= insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) 3= Select the input source with using the TV/WDEO button on the remote control. Note that this TV finds the connected input sources automatically for Video, Front Video and Component 1-2. It is presumed that RGB, HDMI1/DVl and HDM!2 sources are connected. Do not connect to both Video and S-Video at the same time. Owner's Manual 15