LG 43UR640S Owners Manual - Page 38

ENGLISH 1 Power (Command: k a) ►►To control power On/Off of the set. Transmission (k)(a)( )([Set ID])( )([Data])(Cr) [Data] 00: [Off] [Data] 01: [On] Ack (a)( )([Set ID])( )(OK/NG)([Data])(x) ►►To show TV is power on or off Transmission (k)(a)( )([Set ID])( )(FF)(Cr) Ack (a)( )([Set ID])( )(OK/NG)([Data])(x) * Similarly, if other functions transmit '0 x FF' data based on this format, Acknowledgement data feed back presents status about each function. * OK Ack., Error Ack. and other message may display on the screen when TV is power on. 2 [Aspect Ratio] (Command: k c) (Main Picture Size) ►►To adjust the screen format. (Main picture format) You can also adjust the screen format using the picture settings. Transmission (k)(c)( )([Set ID])( )([Data])(Cr) [Data] 01: [4:3] (Normal screen - [Just Scan] Off) [Data] 02: [16:9] (Wide screen - [Just Scan] Off) [Data] 06: [Original] ([Just Scan] Off) [Data] 09: [Just Scan] * Please make sure that the model doesn't support both Vertical Zoom and All-Direction Zoom mode. Ack (c)( )([Set ID])( )(OK/NG)([Data])(x) * Using the PC input, you select either [16:9] or [4:3] screen aspect ratio. * In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50 Hz / 60 Hz, 1080p 24 Hz /30 Hz / 50 Hz / 60 Hz), Component (720p, 1080i, 1080p) mode, [Just Scan] is available. * Full Wide is supported only for Digital, Analogue, AV. 3 Screen Mute (Command: k d) ►►To select screen mute on/off. Transmission (k)(d)( )([Set ID])( )([Data])(Cr) [Data] 00: Screen mute off (Picture on) / Video mute off [Data] 01: Screen mute on (Picture off) [Data] 10: Video mute on Ack (d)( )([Set ID])( )(OK/NG)([Data])(x) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 4 Volume Mute (Command: k e) ►►To control volume mute on/off. You can also adjust mute using the mute button on remote control. Transmission (k)(e)( )([Set ID])( )([Data])(Cr) [Data] 00: Volume mute on (Volume off) [Data] 01: Volume mute off (Volume on) Ack (e)( )([Set ID])( )(OK/NG)([Data])(x) 5 Volume Control (Command: k f ) ►►To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission (k)(f)( )([Set ID])( )([Data])(Cr) [Data] Min: 00 to Max: 64 * Refer to "Real data mapping". Ack (f)( )([Set ID])( )(OK/NG)([Data])(x) 30