LG 43UT640S0UA Owners Manual - Page 39

ENGLISH 17 [Equalizer] (Command: j v) ►►Adjust EQ of the set. Transmission (j)(v)( )([Set ID])( )(Data)(Cr) MSB LSB 00000000 Frequency Data 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band ... 0 1 1 4th Band 1 0 0 1 1 19(decimal) 1 0 0 5th Band 1 0 1 0 0 20(decimal) Ack (v)( )([Set ID])( )(OK/NG)(Data)(x) * It depends on model, and can adjust when sound mode is EQ adjustable value. 18 [Energy Saving] (Command: j q) (Depending upon model) ►►To reduce the power consumption of the TV. You can also adjust energy saving in picture settings. Transmission (j)(q)( )([Set ID])( )(Data)(Cr) Data 00: [Off] Data 01: Minimum Data 02: Medium Data 03: Maximum Data 04: Auto Data 05: Screen off Ack (q)( )([Set ID])( )(OK/NG)(Data)(x) 19 Tune Command (Command: m a) * This command may work differently Depending upon model and signal. * For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model ►►Select channel to following physical number. Transmission (m)(a)( )([Set ID])( )(Data 00)( )(Data 01) ( )(Data 02)(Cr) •• Analog Antenna/Cable (Data 00)(Data 01) Channel Data Data 00: High byte channel data Data 01: Low byte channel data - 00 00 ~ 00 C7 (Decimal: 0 ~ 199) Data 02: Input Source (Analog) - 00: Antenna TV (ATV) - 80: Cable TV (CATV) •• Digital Antenna/Cable/Satellite (Data 00)(Data 01): Channel Data Data 00: High byte channel data Data 01: Low byte channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 02: Input Source (Digital) - 10: Antenna TV (DTV) - 20: Antenna Radio (Radio) - 40: Satellite TV (SDTV) - 50: Satellite Radio (S-Radio) - 90: Cable TV (CADTV) - a0: Cable Radio (CA-Radio) 31