LG 55LD650 Owner's Manual - Page 189
Channel Add/Del Command: m b, Key Command: m c, Backlight Command: m g For LED LCD TV/LCD TV
View all LG 55LD650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 0 Main 1 Sub 0 Two 1 One 0 Use 1 No Use 4 Reserved x x x x x x x x x x The table above lists the binary code which must be converted to Hexadecimal before sending. For example: The binary code to tune the sub source to an NTSC cable channel is "1000 0001", which translates to "81" in Hex. * 7th bit : For which source do you want to change the channel. * 6th bit: Use a two part or one part channel. Most cases just use 0 since it's ignored when using NTSC. * 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesn't matter what the physical number is. * 4th bit: Set to 0. * 3-0 bits: Choose signal type. *Tune Command Examples: 1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital local channel 30-3. Data 00 = Don't know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data00] [Data01] [Data02][Data03][Data04][x][a][ ][Set ID][ ] [NG][Data00][x] 3 2 1 0 Step 0 0 0 0 NTSC Air 000 1 NTSC Cable 00 1 0 ATSC Air 0 0 1 1 ATSC Cable_std 0 1 0 0 ATSC Cable_hrc 0 1 0 1 ATSC Cable_irc 0 1 1 0 ATSC cable_auto 0 1 1 1 Reserved x x x x ... 1 1 1 1 Reserved 22. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 23. Key (Command: m c) To send IR remote control code. Transmission [m][c][ ][Set ID][ ][Data][Cr] See page 183. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 24. Backlight (Command: m g) (For LED LCD TV/LCD TV) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min:00 ~ Max:64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping'. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] APPENDIX 189