LG 55VX1D Owners Manual - Page 41
PM Mode], Power On Delay 0~250], Power On Status], Wake On LAN]
View all LG 55VX1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ENGLISH 13 [PM Mode] •• [Power Off(Default)]: Sets the normal DC off mode. •• [Sustain Aspect Ratio]: Identical to normal DC off mode except that the Switching IC remains on. On some models, this applies only to a specific input mode (DisplayPort) and has the same effect as [Screen Off Always] in other input modes. •• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 mins, 4 hours), or Abnormal Shut Down mode. •• [Screen Off Always]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 mins, 4 hours), Off Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's Power button or the monitor's Off button. •• [Screen Off & Backlight On]: Partially turns on the backlight to keep the display at a proper temperature when in Screen Off status. NOTE •• In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control's Power or Input button, or the monitor's On button. [Power On Delay (0~250)] •• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on. •• You can set the delay interval in the range of 0 to 250 seconds. [Power On Status] •• Select the operating status of the monitor when the main power has turned on. •• You can choose from among [PWR (Power On)], [STD (Standby)], and [LST (Last Status)]. •• [PWR (Power On)] keep the monitor powered on when the main power has turned on. •• [STD (Standby)] switch the monitor to Standby status when the main power has turned on. •• [LST (Last Status)] switches the monitor back to its previous status. [Wake On LAN] •• Set whether to use [Wake On LAN]. •• You can set the feature to On or Off for each wired/wireless network. •• [Wired]: When set to [On], the [Wake On LAN] feature is enabled, letting you turn the product on remotely through a wired network. •• [WiFi]: When set to [On], the [Wake On LAN] feature is enabled, letting you turn the product on remotely through a wireless network.