LG 75UJ6470 Owners Manual - Page 9
Connecting to an Antenna or Cable
View all LG 75UJ6470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connecting to an Antenna or Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional. ••Make sure not to bend the copper wire of the RF cable. Copper wire ••Use a signal splitter to use 2 TVs or more. ••DTV Audio Supported Codec: MPEG, Dolby Digital ••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model) Other Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable General > HDMI ULTRA HD Deep Color : -- On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) -- Off : Support 4K @ 60 Hz 8bit (4:2:0) ••If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn't support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV's HDMI ULTRA HD Deep Color setting to Off. ••HDMI Audio Supported Format: DTS (44.1 kHz / 48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) (Depending upon model) Remote Control (Some buttons and services may not be provided depending on models or regions.) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV's remote sensor. A 1 1 A (Power) Turns the TV on or off. (Input) Changes the input source. Activates or deactivates the subtitles. (User guide) Sees user-guide. (Search) Shows the search mode. Returns to the last TV channel. Number button Enters numbers. * You can access the application or Live TV channel by using the number buttons as registered. - (Dash) Inserts a dash between numbers such as 2-1 and 2-2. Accesses the saved channel list. Alternates between the two last channels selected (pressing repeatedly). Adjusts the volume level. 9 ENGLISH