LG AF115 Owner's Manual - Page 22

Function ►► Fresh Contrast : Adjusts contrast to optimum levels depending on image brightness. ꔃ •Fresh Contrast ꔗ ꔗ Low ꔃ ꔉ OK ꔗ High ꔃ ꔗ Off ꔃ ►► Fresh Colour : Adjusts image colors close to natural colors. ꔃ •Fresh Colour ꔗ ꔗ Off ꔃ ꔉ OK ꔗ Low ꔃ ꔗ High ꔃ ►► Color Temp : Selects the mood of screen colors. ꔃ • Color Temp. ꔗ ꔗ Medium ꔃ ꔉ OK ꔗ Cool ꔃ ꔗ Natural ꔃ ꔗ Warm ꔃ • You can also use the C.TEMP button on the remote control. ►► Noise Reduction : Removes noise from image without damaging it. ꔃ • Noise Reduction ꔗ ꔗ On ꔃ ꔉ OK ꔗ Off ꔃ • You can use it only in Video, S-Video, Component(480i, 480p, 576i, 576p) and HDMI(480p, 576p) modes. ►► Gamma : Sets the intensity of the picture. ꔃ • Gamma ꔗ ꔗ Low ꔃ ꔉ OK ꔗ Medium ꔃ ꔗ High ꔃ • You can also use the GAMMA button on the remote control. ►► Real Cinema : Set up the picture for the best picture appearance for viewing movies. ꔃ • Real Cinema ꔗ ꔗ Off ꔃ ꔉ OK ꔗ On ꔃ • You can use it only in Video, S-Video, Component(480i/576i/1080i 50/60Hz, 1080p 24Hz) and HDMI(1080i 50/60Hz, 1080p 24Hz) modes. ►► Black Level : Adjusting the contrast and the brightness of the screen using the black level of the screen. ꔃ • Black Level ꔗ Low ꔃ ꔗ High ꔃ ꔗ ꔉ OK • You cannot set this function in SECAM, PAL 60 and PAL BGDK signals of Video, S-Video and RGB modes. ►► Lamp Mode : Adjusts the lamp brightness. ꔃ • Lamp Mode ꔗ ꔗ High ꔃ ꔉ OK ꔗ Low ꔃ ►► Overscan : You can adjust from 90, 92, 94...100. ꔃ • Overscan ꔗ 90 ꔃ ~ ꔗ 100 ꔃ ꔗ ꔉ OK • This function cannot be set when PC signal is input, the signal is 1080i and 1080p or Aspect Ratio is set as Justscan. • Noise can occur at the edges of the screen at the signal of 1080i/1080p because of the malfunctioning of an image input device. In this case, change the signal into the one that can be set with Overscan and set Overscan. 22