LG BDH9000 Owners Manual - Page 20
Antenna connection
View all LG BDH9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 Connecting 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. Antenna connection Connect the supplied antenna for listening to the radio. Connecting 2 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. ,,Note yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press B to open the disc tray. 2. Press Z (STOP) for more than 5 seconds. yy When you set the resolution to 576i with HDMI connection, actual resolution is outputted to 576p. yy If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. yy The 1080p video output frame rate may be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. yy The resolution of the VIDEO OUT jack is always outputted at 576i resolution. Rear of the unit ,,Note yy After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.