LG DLEX4000W Owners Manual - Page 26
Four-Wire Power Cord, Attach the two hot leads of the power cord to
View all LG DLEX4000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
26 INSTALLATION Four-Wire Power Cord ••A UL-listed strain relief is required. ••Use a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWGminimum copper conductor and closed loop or forked terminals with upturned ends. 8 Tighten all screws securely. 9 Reinstall the terminal block access cover. Hot (Black) Neutral (White) Ground Screw Hot (Red) White Wire moved from Ground Screw Power Cord Ground Wire 1 Remove the terminal block access cover on the upper back of the dryer. 2 Install a UL-listed strain relief into the power cord through-hole. 3 Thread a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWG-minimum copper conductor through the strain relief. Terminal Block UL-Listed Strain Relief UL-Listed 4-Wire Power Cord 4 Transfer the dryer's ground wire from behind the green ground screw to the center screw of the terminal block. 5 Attach the two hot leads of the power cord to the outer terminal block screws. 6 Attach the white neutral wire to the center screw of the terminal block. 7 Attach the power cord ground wire to the green ground screw.