LG DLEX7177WM Owner's Manual (English) - Page 28
Operating The Dryer - lint filter
View all LG DLEX7177WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
HOW TO USE OPERATING THE Dryer Once you have loaded the dryer: 1 Press the ON/OFF button to turn on the dryer. The lights around the cycle selector knob will illuminate. 2 Turn the cycle selector knob to the desired cycle. The display will show the preset Dry Level, Temperature, Time, and Option settings for that cycle. ELICATES 3 ULTRA DELICATES MANUAL DRY SPEED DRY FRESHEN UP AIR DRY If you would like to change the settings for that cycle, press the option SENSORDRY button(s) to disMpTIOMlRaEEy ad20%ditional settings 0:20 EST.TIME REMAINING forLTEItMShSE at option. Press the buNtOtRonMAaLgain to cycle through the settingsNOuRMnAL tilMEtDIhUMe desired OFF MID HIGH setting is highlighted. DRY LEVEL TEMP. CONTROL TIME DRY BEEPER NOTE: To protect your garments, not every dry level, temperature, or option is available with every cycle. 4 Select any additional cycle options, such as REDUCE STATIC, EASY IRON, CUSTOM PROGRAM, WRINKLE CARE (*RACK DRY), and ANTI BACTERIAL (*DAMP DRY BEEP), by pressing the button for that option. 5 Press the START/PAUSE button to begin the cycle. The display will change, and the dryer will display the estimated (SENSOR DRY) or set time (MANUAL DRY) remaining and start tumbling. To pause the cycle at any time, open the dryer door or press PAUSE. To resume the cycle where it was stopped, press START/PAUSE again. NOTE: If the dryer has been stopped for more than 8 minutes, the dryer will turn off automatically. 6 When the load is finished, the beeper (if set) will sound. If you have set the WRINKLE CARE option, the dryer will tumble the load periodically for up to 3 hours. To prevent wrinkling, remove items from the dryer immediately after the end of the cycle. 7 Always clean the lint filter after every cycle. To clean, pull the lint filter straight up and roll any lint off the filter with your fingers. Do not rinse or wash the filter to remove lint. Push the lint filter firmly back into place. 28