LG DLG0452G Owner's Manual - Page 24

Part 9 OPERATING YOUR DRYER 3 Dry Level • Use this button to set dry level • First, select sensor dry cycle. • Select dry level to adjust how much you want to dry the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically based on the selected dryness level. Note DRY LEVEL selections can only be made while using Sensor Dry Cycles. Selecting MORE Dry or LESS Dry automatically adjusts the needed time which is already sensed. 4 Temp. Control Use Temp. Control Option to select temperatures for the Manual Cycles. Press TEMP. CONTROL until the desired temperature setting glows. Temperature modifiers cannot be used with the Sensor Dry Cycles. Type of Load Foam rubber-pillows, padded bras, stuffed toys Plastic-Shower curtains, tableclothes Rubber-backed rugs Olefin, polypropylene, shear nylon Default Time* (Minutes) 20 - 30 20 - 30 40 - 50 10 - 20 24 5 Time Dry Use Time Dry Option to change Drying Time on your own. You can select the desired operation time manually by pressing Time Dry button which ranges from 20 to 60 minutes. Manual Preset Cycle Settings Manual Dry Temp. Cycles Load Type Default Time* (Minutes) SPEED DRY SMALL LOADS FRESHEN UP Remove Wrinkles AIR DRY High 25 Medium 20 High Air Dry 30 6 Beeper The BEEPER controls the volume of the beep that is made when you press any of the buttons on the control panel and the termination of any cycle is indicated. Press BEEPER to adjust the sound level or turn off the signal. 7 CUSTOM PROGRAM Custom Programming Set up your favorite combination of settings and save them here for onetouch recall. 1. Select a cycle 2. Change DRY LEVEL and TEMP. CONTROL. 3. Select OPTIONS you want. 4. Press and hold the CUSTOM PROGRAM. To recall your stored CUSTOM PROGRAM Press CUSTOM PROGRAM button, then press START/PAUSE.