LG DLG3601W Owners Manual - Page 15
Reversing the Door (DLEX4200*, DLGX4201*, DLE3600*, DLG3601*), Tools Required
View all LG DLG3601W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH Reversing the Door (DLEX4200*, DLGX4201*, DLEX4000*,DLGX4001*, DLE3600*, DLG3601*) Tools Required ••Phillips screwdriver ••Large flat blade screwdriver (recommended for hinge screws if they are tight or your Phillips screwdriver is worn) ••Small flat blade screwdriver (for lifting out parts) WARNING To reduce the risk of damage to the dryer, property damage or personal injury, follow basic precautions, including the following: ••Support the door with a stool or box that fits under the door, or have an assistant support the weight of the door. ••Avoid dropping the door. ••Unplug the dryer or turn off power at the main circuit breaker before beginning door reversal. ••Always reverse the door BEFORE stacking the dryer on top of the washer. Door Reversal Instructions The instructions here are for changing the door swing from a right to a left side hinge. If the door has been reversed, and it is necessary to change it back, use care when following these instructions. Some of the illustrations and the left/right references will be reversed, and you will need to read the instructions carefully. INSTALLATION 15 2 While supporting the door, remove the 2 screws on the door hinge. Remove the door. 3 Turn the door upside down and line up the holes in the hinge with the holes on the opposite side of the cabinet. Reinstall the door with the screws removed in step 2. WARNING ••Be sure to support the weight of the door before installing the hinge screws. 4 Install the two decorative screws, the latch, and two latch screws removed in step 1 on the opposite side from which they were removed. WARNING ••Be sure to support the weight of the door before removing the hinge screws. 1 Open the door and remove the two decorative screws, two latch screws, and the latch on the catch side with a screwdriver. Save these for step 4. 5 Check that the door closes properly.