LG DLG9588SM Owners Manual - Page 16
Removepedestal, installation, hardware, instructions, fromtheshippingcarton.
View all LG DLG9588SM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Removepedestali,nstallatiohnardwarea,nd instructionfsromtheshippingcarton. Position dryer on top of the pedestal. NOTE • Because of the weight of the dryer two or more people may be needed. NOTE : If dryer was previously installed, uninstall it as follows: A. Uninstalling an electric dryer: 1) Unplug the power supply cord, 2) Pull the dryer away from the wall enough to loosen the vent clamp. Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet. B. Uninstalling a gas dryer: 1) Shut off Gas 2) Unplug Power Cord 3) Disconnect Gas Line from Dryer 4) Pull away and loosen vent clamp. Disconnect venting. combo -- for dryer __ for washer/ combo Attach the double-sided tape of the bracket to the dryer as shown so the bent parts of the brackets align with the edge and can be attached to the pedestal with screws. NOTE : Attach the lower side first. Be sure to press the adhesive parts of the brackets firmly to the appliance. Install the eight (8) screws(supplied) to attach the brackets to the pedestal. " F Remove the paper from the bracket. /6 Move the dryer to the desired place. NOTE : The appliance and pedestal assembly must be placed on a solid and level floor for proper operation. Adjust the legs of the appliance and pedestal by turning with a wrench. Then, adjust the lock unt toward the pedestal while holding the pedestal leg using a wrench.