LG DLGX3361V Owner's Manual - Page 32
Cycle Setting Buttons
View all LG DLGX3361V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
CYCLE SETTING BUTTONS SENSOR DRY cycles have preset settings that are selected automatically. MANUAL DRY cycles have default settings, but you may also customize the settings using the cycle setting buttons. Press the button for that option to view and select other settings. NOTE: To protect your garments, not every dryness level, temperature, or option is available with every cycle. See the Cycle Guide for details. DRY LEVEL Selects the level of dryness for the cycle. Press the DRY LEVEL button repeatedly to scroll through available settings. • This option is only available with SENSOR DRY cycles. • The dryer will automatically adjust the cycle time. Selecting VERY DRY or MORE DRY will increase the cycle time, while LESS DRY or DAMP DRY will decrease the cycle time. • Use a LESS DRY or DAMP DRY setting for items that you wish to iron. TEMP. CONTROL Adjusts the temperature setting from ULTRA LOW to HIGH. This allows precise care of your fabrics and garments. Press the TEMP. CONTROL button repeatedly to scroll through available settings. TIME DRY Allows you to manually select the drying time, from 20 to 60 minutes, in 10-minute increments. Use this for small loads or to remove wrinkles. Use the MORE TIME/LESS TIME buttons to add or reduce the drying time in 1-minute increments. SIGNAL Adjusts the volume of the end-ofcycle signal, or turns off the signal. 32 Your dryer features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function (see the following page for details) that can be activated by pressing and holding that option button for 3 seconds. To Add Cycle Options to a Cycle: 1 Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2 Use the cycle settings buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4 Press the START/PAUSE button to start the cycle. The dryer will start automatically. WRINKLE CARE Selecting this option will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to immediately remove items from the dryer. DAMP DRY SIGNAL With this option, the dryer will signal when the load is approximately 80% dry. This allows you to remove faster- drying lightweight items or items that you would like to iron or hang while still slightly damp.