LG DLGX3876W Owner's Manual - Page 41
LG DLGX3876W Manual
UPC - 048231011129
View all LG DLGX3876W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
BEFORE CALLING FOR SERVICE (cont.) Problem Steamdoesn't generate but no error code is shown. Garments still wrinkled after STEAMFRESH™. There are no creases left on garment after STEAMFRESH™. Garments have static after REDUCE STATIC. Garments are too damp or too dry after REDUCESTATIC. Garments are not uniformly damp after EASYIRON. Water drips from door duringSteamCycle. Steamisnotvisible duringSteamCycle. Drum does not turn duringSteamCycle. Cannot see steam vapor at the beginning of cycle. The display shows BULKY LOAD. Odors remain in clothing after STEAMFRESH™. CHECK FILTER light is on during the drying cycle 2 bars are displayed In the LCD screen. END OF CYCLE ENGLISH Possible Causes • Water level error. • Too many or too different types of garments in dryer. • The function of this cycle is to remove wrinkles from fabric. • This is normal. Solutions • Unplug dryer and call for service. • Small loads of 1 to 5 items work best. • Load fewer garments. Load similar-type garments. • Use an iron to make creases. • Depends on individual moisture level in skin. • Correct drying options not selected. • This is normal. • Select load weight manually before starting REDUCE STATIC option. • Depends on the amount or type of garments. • This is normal. • This is normal. • This is normal. • This is normal. • This is steam condensation on door surface. • Steam vapor is difficult to see when the door is closed. • The drum is turned off so that the steam vapor remains in the drum. • Steam is released at different stages of the cycle for each option. • Pressing the MORE TIME button several times will set the cycle for a large load such as a comforter. • Fabrics containing strong odors should be washed in a normal cycle. • Pause the drying cycle and clean the lint filter. • Install a shorter or straighter duct run. See the Installation Instructions. • Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. • If "END OF CYCLE" is displayed after the end of cycle, it will be off in 4 minutes. If POWER button is pressed or the door is opened, power will be off immediately. • Install a shorter or straighter duct run. See the Installation Instructions. • uctwork should be checked/cleaned soon. D Dryer can be used in this condition, but drying times may be longer. • f "NEED FLOW CHECK" is displayed after the end I of cycle, it will be off in 2 hours. If POWER button is pressed or the door is opened, power will be off immediately. • MORE TIME button pressed. • STEAMFRESH™ did not remove odor completely. • Lint filter is almost clogged or full. • Ductwork is slightly too long or has too many turns/restrictions. • Partial blockage of the ductwork due to lint buildup. FIN DEL CICLO 4 bars are displayed In the LCD screen. NEED FLOW CHECK THE DUCTWORK HAS A BLOCKAGE THAT NEEDS TO BE REMOVED IMMEDIATELY. FIN DE CYCLE • Ductwork is too long or has too many turns/restrictions. • Significant blockage of the ductwork due to lint buildup or debris. 41 MFL62512806_EN_0208.indd 41 2010.2.8 2:7:54 PM