LG DLGX3886W Additional Link - Measure First Laundry Installation Guide - Page 2

CLEAR THE WAY Prepare for a smooth delivery by dealing with potential obstacles now. Here are some helpful hints to try: • If a doorway is too narrow or the door cannot be opened fully, remove the door. If the hinges are fixed pin hinges, they will need to be unscrewed to remove the door. • For narrow stairs with hand rails, removing the railing may help you meet the minimum 30" clearance. • If the laundry room isn't deep enough for the appliances plus the dryer duct, you may be able to use special venting components, such as a side vent kit, to reduce venting requirements. See associate for details. Remember, if ANY part of the delivery path or final installation location is too small to fit this LG washer and dryer, and the obstructions can't be moved, you'll need to notify your retailer BEFORE your scheduled delivery date! GET IT INSTALLED To ensure your installation goes smoothly, here are some final items you'll need to have in place: FOR WASHER: FOR ELECTRIC DRYER: FOR GAS DRYER: 110V grounded 3-prong electrical outlet within 6 feet Water supply (hot and cold) Drain must be no higher than 96 inches and within 5 feet of the washer A clean, solid and level floor surface New electrical cord (3- or 4-prong depending on your outlet, sold separately) 240V electrical outlet UL approved rigid or semi-rigid dryer venting (never use foil or plastic) New gas flex connection kit (sold separately) and natural gas line connection LP conversion kit (if not using natural gas, sold separately) 110V grounded 3-prong electrical outlet within 4 feet UL approved rigid or semi-rigid dryer venting (never use foil or plastic) If your purchase includes installation, your LG washer and dryer will be unboxed, put in place, connected to the appropriate sources and leveled. Then they'll be tested to make sure that everything works correctly. All packing material will be removed and your home restored to its original condition. Note: Accessories, stacking kits and pedestals are sold separately.