LG DLGX5102V Owner's Manual - Page 33
To Fill the Steam Feeder
View all LG DLGX5102V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH STEAM FUNCTIONS (cont.) To Fill the Steam Feeder 1 Open the lid. Lid 3 Fill the steam feeder to MAX with water. Steam Feeder Water ONLY MAX 2 Lift out the steam feeder. 2 1 4 Place the steam feeder in the square barrel, then cover the lid. IMPORTANT NOTES ABOUT STEAM CYCLES Before using a Steam Cycle, the steam feeder must be filled with water up to the MAX line. If not, the ADD WATER light will blink. Make sure that the steam feeder is filled with water and the cartridge is completely connected. Turn the dryer off then restart the Steam Cycle. • Only use water. Do not fill the steam feeder with foreign substances, rinse agents, or detergents. • Before moving the dryer, make sure the steam feeder is empty. • Do not use distilled water; the water level sensor in the steam generator will not work. • Be careful while filling the steam feeder to avoid overflow and spilling. • Wipe up any spilled water around the steam feeder and the drawer before starting the dryer. wWARNING: • Do not fill the steam feeder with liquids such as gasoline, dry-cleaning solvents, or other flammable or explosive substances. They give off vapors that could explode. • Do not fill the steam feeder with hot water (over 86°F/30°C). • Do not drink water from the steam feeder. 33