LG DLGX5102W Owner's Manual - Page 12

REVERSING THE DOOR Hole cap Hinge assembly Cover cap 1 Open the door and remove the two plastic hole caps on the catch side by gently prying up with a flat blade screwdriver. Save these for step 6. CAUTION Support the weight of the door when removing the screws in the next step. Failure to properly support the weight of the door could result in property damage, damage to the dryer, or personal injury. Hinge Screw 4 Remove the 4 screws securing the hinges to the door frame. Remove the two plastic cover caps. Reinstall the hinges and cover caps on the opposite sides from which they were removed. 5 With the hinges and cover caps in the new locations, remount the inner door frame onto the outer door frame with the screws removed in step 3 above. 2 While supporting the door, remove the 4 screws, two from each hinge. Set the door aside face down on a protected surface to prevent damage to the door or the work surface. inner door frame latch hook 6 Reinstall the door with the screws from step 1,2. 3 With the door on a protected surface, remove the 12 screws on each side of the door and lift off the inner door frame using a flat blade screwdriver. Remove the latch hook and blank and move them to the opposite side. 12 Swing Door 7 Test the swing of the door to make sure the hinges and latch are properly aligned and that the door closes and latches correctly.