LG HMC036KDT1 Owners Manual - Page 13
Operation
View all LG HMC036KDT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Auto Operation Safety Precautions Press the Start/Stop button. The unit will respond with a beep. A 2 Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. 4% 0 C1 *A0 * A IE. • o won/ Cooling Auto Healthy Dehumidification 30, **NM Heating Heat pump model only The temperature and fan speed are automatically set by the ) electronic controls based on the actual room temperature. If you want to change the set temperature, close the door on the remote control and press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to two times) you should press the button. The set temperature will then be changed automatically. To raise the temperature To lower the temperature During Auto Operation: u You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule. u If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, it must be done by manually resetting. u During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the chaos swing button again. _) Owner's Manual 13