LG HX300G Owners Manual - Page 28

Function Screen Capture Function 1. Press the MENU button. Then, move to OPTION with the buttons and press the ◉OK button. 2. Press the ∧, ∨ buttons to move to Screen Capture and press the ◉OK button. • It can only be elected when there is an input signal. • It takes up to 2 minutes when capturing screen. • Press the BACK button to exit the menu screen. OPTION Menu Language Blank Image Screen Capture LED Mode Auto Power Demo Mode Initial Setting : English : Blue ꔂMove ꔉOK : Normal : Off : Off : Home Use To adjust the brightness of the screen 1. Press the Q.MENU button on the remote control. 2. Press the ＜, ＞ buttons to move to LED Mode. 3. Move to a desired item with the ＜, ＞ buttons. • LED Mode changes into Dimming mode automatically at specific temperatures (37°C or higher). Dimming mode gets about 90% brightness of original led mode. • LED Mode changes into Dimming mode automatically if use a optical battery. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. LED Mode Normal To make the power of the projector turn on automatically when power is in 1. Press the MENU button. Then, move to OPTION with the buttons and press the ◉OK button. 2. Press the ∧, ∨ buttons to move to Auto Power and press the ◉OK button. 3. Press the ∧, ∨ buttons to move to On and press the ◉OK button. OPTION Menu Language Blank Image Screen Capture LED Mode Auto Power Demo Mode Initial Setting : English : Blue ꔂMove ꔉOK : Normal : Off : Off : Home Use • On: Connecting DC cable to the projector turns on the projector. • Off: Connecting DC cable to the projector makes the projector in standby state. • Press the BACK button to exit the menu screen. 28