LG L5004R Owners Manual - Page 15

mark Fan Only

Page 15 highlights

Operating Instructions If you turn off the air conditioner or switch from cooling to the fan, wait at least 3. minutes before setting to cooling again.. POWER -Turns air _nditioner off_ i> FAN SPEED "LOW"Low speed fan operation with c_ling or not. i> FAN SPEED "HI" High speed fan operation with c_ling or not. This automatically condo, is the temperature of ind_r air: Turn the knob _ that arrow _ints to the _oler marks for more moderate c_ling. Nodal Fan i_ Turn the FAN speed mode switch to the "Hi" or the "LOW" setting 2. Set the thermostat control to the temperature mark "Fan Only" Nodal cooling 1. Turn the FAN speed m_e switch to the "HI" or tlhe "LOW" setting 2. Set the thermostat control to the desire temperature (the mid-_int is a go_ starting position). If the room temperature is not satisfactory after a reasonable time, adjust the control to a warmer setting, as appropriate. Maximum cooling 1, Turn the FAN speed m_e switch to the "HI" setting 2. Set the thermostat control to the cooler temperature mark. Quieter operation 1. Turn the FAN speed mode switch to the "LOW" setting 2 Set the thermostat control as needed, Room A# Con,difioner 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Operating
Instructions
If
you turn off the air conditioner
or switch
from
cooling
to
the fan, wait at least 3.
minutes
before
setting
to cooling
again..
POWER
-Turns air _nditioner
off_
i>
FAN SPEED
"LOW"Low
speed
fan operation
with c_ling
or not.
i> FAN
SPEED
"HI" High speed fan operation
with c_ling
or not.
This automatically
condo, is the temperature
of ind_r
air:
Turn
the knob _
that
arrow
_ints
to the _oler
marks
for more moderate
c_ling.
Nodal
Fan
i_ Turn the FAN speed
mode switch to the "Hi" or the "LOW"
setting
2. Set the thermostat
control
to the temperature
mark "Fan Only"
Nodal
cooling
1. Turn the FAN speed
m_e
switch to the "HI" or tlhe "LOW"
setting
2. Set the thermostat
control
to the desire
temperature
(the mid-_int
is a go_
starting
position).
If the room temperature
is not satisfactory
after a reasonable
time,
adjust the
control
to a warmer
setting,
as appropriate.
Maximum
cooling
1, Turn the FAN speed
m_e
switch to the "HI" setting
2. Set the thermostat
control
to the cooler
temperature
mark.
Quieter
operation
1. Turn the FAN speed
mode switch to the "LOW"
setting
2 Set the thermostat
control
as needed,
Room
A#
Con,
difioner
15