LG LAN091CNP Owner's Manual - Page 16
Auto changeover operation Optional
View all LG LAN091CNP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Operating Instructions Auto changeover operation (Optional) 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door of the remote controller. To select Auto Changeover Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling Auto� Healthy� Heating� changeover Dehumidification (Heat pump model only) 3 Close the door of the remote controller. Set the temperature lower than the room temperature. The temperature can be set within a range of 64°F~86°F(18°C~30°C) at intervals of 2°F(1°C). To raise the temperature ON To lower the temperature 4 Set the fan speed again with the door of the remote controller still closed. You can select the fan speed in four steps-low, medium, high and CHAOS. Each time the button is pressed, the fan speed mode is shifted. During Auto changeover Operation The air conditioner changes the operation mode automatically to keep indoor temperature. When room temperature vary over ±4°F(±2°C) with respect to setting temperature, air conditioner keeps the room temperature within ±4°F(±2°C) with respect to setting temperature by auto changeover mode. 16 Room Air Conditioner