LG LCE30845 Service Manual - Page 27
Using The Bridge Cooking Zones, Using The Timer
UPC - 048231316033
View all LG LCE30845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
OPERATING INSTRUCTIONS USING THE BRIDGE COOKING ZONES BRIDGE COOKING ZONES The two left Cooking Zones can be used together as a single Cooking Zone using the Bridge function. This allows you to cook with larger, oblong pans. NOTE: When using the supplied bridge pan, it is important to rub it with oil to prevent burning and sticking. ACTIVATING THE BRIDGE COOKING ZONE Touch the BRIDGE pad. The indicator above the pad will light. Touch the or pad for either left Cooking Zone to adjust the power level for both Cooking Zones. NOTE: • Use the supplied bridge pan ONLY on the bridge cooking zone. • To purchase a replacement or additional bridge pans, call 1-800-243-0000 and choose the appropriate prompt from the menu. Or, visit our Web site at http://us.lgservice.com. USING THE TIMER The timer feature may be helpful if a recipe calls for cooking for a set time. The timer can be set from 1 to 99 minutes. Once set, the digital display between the timer or pads will begin to count down the remaining time in minutes. NOTE: The timer function is a minute timer only. It does NOT turn the cooktop ON or OFF. SETTING THE TIMER Touch the or pads under the word TIMER. Each touch will increase or decrease the time by one minute, from 1 to 99 minutes. You may also touch and hold or to scroll up or down. The timer display will flash. Once the desired time is set, the display will stop flashing and the timer will start counting down after no pad has been touched for 5 seconds. Once the timer reaches , a long beep will sound to indicate the time is up. CANCELING THE TIMER To cancel the timer, touch the TIMER Touch and hold the or pad until The timer display will turn off. and pads at the same time, OR appears in the display. LGE Internal Use Only - 27 - Copyright © 2007 LG Electronics. Inc. All right reserved. Only for training and service purposes