LG LFX23961ST Owner's Manual - Page 16

USING YOUR REFRIGERATOR SETTING THE CONTROLS The LED display shows the temperature settings, dispenser options, and the water filter, door alarm, and locking status messages. ADJUSTING THE TEMPERATURES AND DISPLAY Adjust Freezer Temperature To adjust the temperature in the freezer compartment, press the FREEZER button to cycle through the range of available settings. Adjust Refrigerator Temperature To adjust the temperature in the refrigerator compartment, press the REFRIGERATOR button to cycle through the range of available settings. 1 Dispenser selection indicator Shows cubed ice or crushed ice selection that will be dispensed when the push switch is pressed. 2 Freezer temperature Indicates the set temperature of the freezer compartment in Celsius or Fahrenheit. 3 Refrigerator temperature Indicates the set temperature of the refrigerator compartment in Celsius or Fahrenheit. 4 Ice Plus When the ICE PLUS button is pressed, the display will indicate the selected function has been activated. 5 Dispenser light indicator When the LIGHT button is pressed, the display will indicate the selected function: The dispenser light is on, this indicator will appear on the display panel. 6 Door alarm indicator This indicator shows that the door-open warning alarm is activated. 7 Water filter status This indicator shows the current status for the water filter. See the filter indicator. 8 Lock status This indicator shows the current status for the control panel functions is set to LOCK. NOTE: The actual inner temperature varies depending on the food status, since the indicated temperature setting is the target temperature and not the actual temperature within the refrigerator. Initially set the REFRIGERATOR CONTROL at 37 °F (3 °C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as illustrated above. Temperature Display To change the temperature display from Fahrenheit to Celsius: • Simultaneously press and hold the FREEZER and REFRIGERATOR buttons for more than 5 seconds. • DO the same to convert back to Fahrenheit. OPERATING THE DISPENSER Dispensing Crushed Ice Press the ICE TYPE button to illuminate the Crushed and Cubed Ice icon. Press the push switch with a glass or other container and crushed ice will be dispensed. Press the push switch with a glass or other container and cubed ice will be dispensed. NOTE: Hold the glass or other container in place for a couple of seconds after dispensing ice or water to catch the last few cubes or drops. The dispenser is designed not to operate while either refrigerator door is open. DISPENSING WATER Press the push water switch or activate water button with a glass or other container and chilled water will be dispensed. When the water switch or water button is pressed, the light will be illuminated. 16