LG LFX28979SB Owner's Manual - Page 35

Light Replacement

Page 35 highlights

MAINTENANCE 35 ENGLISH Light Replacement To Change Refrigerator Light This model has special LED interior lighting and service should be performed by a qualified technician. Warning Electrical Shock Hazard Before replacing a burned-out light bulb, either unplug the refrigerator or turn off power at the circuit breaker or fuse box.inside of drawer. Note Moving the control to the OFF position does not remove power to the light circuit. Note • Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. • The light bulbs will turn off if door is left open for seven continuous minutes. Shutting door for one second will light bulbs to come back on. To Change Freezer Light 1 Unplug refrigerator power cord form outlet. 2 Use a screwdriver to remove the cover screw. (Save the cover screw) 3 Using a flat instrument, gently pry the lamp cover loose in the front as shown. Rotate downward to remove the rear tabs. 4 Make sure the bulb is cool to the touch. Turn the bulb counterclockwise to remove. 5 Make sure the bulb is cool to the touch. Turn the bulb counterclockwise to remove. 6 Insert tabs on back of cover into slots in freezer ceiling. Push cover up to snap front into place. 7 Use a screwdriver to assemble the cover screw. CAUTION yy DO NOT place fingers inside of cover. Lamp may be hot.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

ENGLISH
35
MAINTENANCE
To Change Refrigerator Light
This model has special LED interior lighting and service
should be performed by a qualified technician.
Light Replacement
WARNING
Electrical Shock Hazard
Before replacing a burned-out light bulb, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box.inside of drawer.
CAUTION
DO NOT place fingers inside of cover.
y
Lamp may be hot.
NOTE
Moving the control to the OFF position does not
remove power to the light circuit.
NOTE
• Not all appliance bulbs will fit your refrigerator.
Be sure to replace the bulb with one of the same
size, shape and wattage.
• The light bulbs will turn off if door is left open for
seven continuous minutes. Shutting door for one
second will light bulbs to come back on.
To Change Freezer Light
1
Unplug refrigerator power cord form outlet.
2
Use a screwdriver to remove the cover screw.
(Save the cover screw)
3
Using a flat instrument,
gently pry the lamp cover
loose in the front as
shown. Rotate downward
to remove the rear tabs.
4
Make sure the bulb is cool
to the touch. Turn the
bulb counterclockwise to
remove.
5
Make sure the bulb is cool
to the touch. Turn the
bulb counterclockwise to
remove.
6
Insert tabs on back of
cover into slots in freezer ceiling. Push cover up to snap
front into place.
7
Use a screwdriver to assemble the cover screw.