LG LMX28994ST Owner's Manual - Page 14

Converta Drawer Removal And Reinstallation

Page 14 highlights

CONVERTA DRAWER REMOVAL AND REINSTALLATION CONVERTA DRAWER REMOVAL wCAUTION • Care should be taken to avoid product or property damage when removing the converta drawer. It maybe necessary to have assistance with the following insturctions. • To avoid damage do not hold the handle when removing the door. It could come off and cause and injury. CONVERTA DRAWER 1 Fully extend the converta drawer. Lifting up and out to remove the drawer and ice bin making sure to clear the rail system. 2 Remove the cover of housing by pulling upside. Detach the rail housing from the case. 1 3 Remove one white screw ቢ on each side of the rails. Holding both sides of the door pull up to separate the door from the rails. 54 With both hands, bend the center bar just enough to allow the gears on both ends to release from their tracks. wCAUTION: When you remove the drawer, do not hold the handle. It may come off and it could cause personal injury. wCAUTION: When placing the drawer on the floor, care should be taken to avoid floor damage. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

14
CONVERTA DRAWER REMOVAL AND REINSTALLATION
CONVERTA DRAWER REMOVAL
w
CAUTION
• Care should be taken to avoid product or property
damage when removing the converta drawer. It
maybe necessary to have assistance with the
following insturctions.
• To avoid damage do not hold the handle when
removing the door. It could come off and cause and
injury.
w
CAUTION:
When you remove the drawer, do not hold the handle. It may come off and it could cause
personal injury.
w
CAUTION:
When placing the drawer on the floor, care should be taken to avoid floor damage.
Remove the cover of housing by pulling
upside.
Detach the rail housing from the case.
2
Fully extend the converta drawer. Lifting up
and out to remove the drawer and ice bin
making sure to clear the rail system.
1
Remove one white screw
±
on each side of
the rails.
Holding both sides of the door pull up to
separate the door from the rails.
1
3
With both hands, bend the center bar just
enough to allow the gears on both ends to
release from their tracks.
5
4
CONVERTA DRAWER