LG LMXS30746S Owners Manual - Page 13
Removing/Assembling the, Doors and Drawers, Freezer Drawer Handle
View all LG LMXS30746S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH INSTALLATION 13 Removing/Assembling the Freezer Drawer Handle Removing the Handle 1 Loosen the set screws located on the lower side of the handle with a 1/8 in. Allen wrench and remove the handle. 2 Loosen the mounting fasteners that connect to the freezer drawer and handle using a 1/4 in. Allen wrench, and remove the mounting fasteners. Assembling the Handle 1 Assemble the mounting fasteners at both ends of the handle using a 1/4 in. Allen wrench. 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws with a 1/8 in. Allen wrench. Removing/Assembling the Doors and Drawers When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure. WARNING y If your entrance door is too narrow for the refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway. y Use two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury. y Disconnect the electrical supply to the refrigerator before installing. Failure to do so could result in serious injury or death. y Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. You may be injured or receive an electrical shock. y Be careful when handling the hinge and stopper, to avoid injury. y Remove food and bins before detaching the doors and drawers. WARNING When assembling or disassembling the handle: y Grasp the handle tightly to avoid dropping it. y Do not swing the handle into nearby people or animals. y Make sure that the bracket hole of the handle fits properly into the stopper bolt of the door. Assemble the set screws to fix the handle into place. y Make sure that there is not a gap between the door and handle after assembling the handle.