LG LP6011ER Owner's Manual - Page 15

Removal, Window, Caution

Page 15 highlights

(a) When window frame is located on inner sill. • Install a wood strip (window width long and window frame height high) on the inner sill. SASH WINDOW - WINDOW FRAME WOOD STRIP INNER SILL OUTER SILL (b) When the window frame is higher than 19/32"(15mm) • Install a wood strip (about 4"(102mm) long) on the outdoor sill to raise support bracket. WINDOW FRAME -1 WOOD STRIP 19/32"(15mm) INNER SILL OUTER SILL FIG. 9 REMOVAL FROM WINDOW • Turn off and unplug the air conditioner. • Unscrew the side screws that you installed in Step 5. 6. • Close the curtain frame and remove foam seal and L bracket from the windows. • Keep a firm grip on the air as you the sash. • Lift the air conditioner from the window and remove the foam strip from between the windows. • Remove the support bracket from window frame. NOTE: When cooling season is over, unit is removed from window for cleaning and storage. There may still be some condensation water in the basepan. Remove the unit carefully to avoid water being spilled out on floor. Always store unit flat on its base. Do not stand it on its end. Be sure to remove support bracket, L bracket, and foam seal from window and save. Window will not close if support bracket remains installed. A CAUTION • Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install the unit. To prevent injury or strain, use proper lifting and carrying techniques when moving unit. • When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils. • Make sure air conditioner does not fall during removal.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

(a)
When
window
frame
is
located
on
inner
sill.
Install
a
wood
strip
(window
width
long
and
window
frame
height
high)
on
the
inner
sill.
SASH
WINDOW
-
WINDOW
FRAME
WOOD
STRIP
INNER
SILL
OUTER
SILL
(b)
When
the
window
frame
is
higher
than
19/32"(15mm)
Install
a
wood
strip
(about
4"(102mm)
long)
on
the
outdoor
sill
to
raise
support
bracket.
WINDOW
FRAME
-1
WOOD
STRIP
19/32"(15mm)
INNER
SILL
OUTER
SILL
FIG.
9
REMOVAL
FROM
WINDOW
Turn
off
and
unplug
the
air
conditioner.
Unscrew
the
side
screws
that
you
installed
in
Step
5.
6.
Close
the
curtain
frame
and
remove
foam
seal
and
L
bracket
from
the
windows.
Keep
a
firm
grip
on
the
air
as
you
the
sash.
Lift
the
air
conditioner
from
the
window
and
remove
the
foam
strip
from
between
the
windows.
Remove
the
support
bracket
from
window
frame.
NOTE:
When
cooling
season
is
over,
unit
is
removed
from
window
for
cleaning
and
storage.
There
may
still
be
some
condensation
water
in
the
basepan.
Remove
the
unit
carefully
to
avoid
water
being
spilled
out
on
fl
oor.
Always
store
unit
fl
at
on
its
base.
Do
not
stand
it
on
its
end.
Be
sure
to
remove
support
bracket,
L
bracket,
and
foam
seal
from
window
and
save.
Window
will
not
close
if
support
bracket
remains
installed.
A
CAUTION
Air
conditioners
covered
in
this
manual
pose
an
excessive
weight
hazard.
Two
or
more
people
are
needed
to
move
and
install
the
unit.
To
prevent
injury
or
strain,
use
proper
lifting
and
carrying
techniques
when
moving
unit.
When
handling
the
air
conditioner,
be
careful
to
avoid
cuts
from
sharp
metal
fins
on
front
and
rear
coils.
Make
sure
air
conditioner
does
not
fall
during
removal.