LG LRFC22750ST Owner's Manual - Page 21

USING YOUR REFRIGERATOR To remove the glass: 1. Lift up the glass after inserting a screwdriver under the criper cover. 2. Pull up and out. To remove the lattice on inner surface: To remove the crisper: 1. Slide crisper straight out to the stop. 2. Lift the front of the crisper, then pull it out to remove. 3. Replace the crisper by sliding it back in fully past the drawer stop. 1. Remove crisper cover (as illustrated above). 2. Hold the glass cover and turn the crisper cover over. 3. For each lattice hold lattice and pull sides of the cover outward to remove lattice. 1 2 To replace lattice on inner surface: 1. For each lattice insert middle tab in 1 (closed to glass cover)and pull sides of the cover to insert lattice. CRISPER COVER WITH LATTICE ON INNER SURFACE To remove the crisper cover: 1. Remove both crisper drawers. 2. While holding the crisper cover support (2), pull the cover up and out(1). 2 3 1 WARNING: Be careful when handing glass cover since glass is not attached to cover. 21