LG LRFGC2706S Owners Manual - Page 15
Removing/Assembling, Doors and Drawers
View all LG LRFGC2706S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws b with a 3/32 in. Allen wrench. • For models shipped with the handles assembled, use a 1/8 in. Allen wrench. INSTALLATION 15 located at the bottom of the front side of the cover with a flat-head screwdriver. Removing the Left Refrigerator Door 1 Disconnect all the wire harnesses a. Unscrew the ground wire b. Removing/Assembling Doors and Drawers If the entrance door is too narrow for the refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway. WARNING • Use two or more people to remove and install the refrigerator doors and drawers. • Disconnect the electrical supply to the refrigerator before installing. • Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. • Be careful when handling the hinge and hinge lever. • Remove food and bins before detaching the doors and drawers. • Do not hold the handle when removing or replacing the doors and drawers as the handle may come off. • Tools Needed - Phillips screwdriver - Flat-head screwdriver Removing the Hinge Cover Remove the screws from the hinge cover at the top of the refrigerator. Lift the hook (not visible), 2 Rotate the hinge lever c counterclockwise. Lift the top hinge d free of the hinge lever latch e. CAUTION • When lifting the hinge free of the latch, be careful that the door does not fall forward. 3 Lift the door from the middle hinge pin and remove the door. CAUTION • Place the door, inside facing up, on a nonscratching surface.